Cadillac Fleetwood Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(32)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(32)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a Cadillac Fleetwood Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Cadillac FleetwoodV8-4.5LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1970 Cadillac FleetwoodV8-7.7LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1983 Cadillac FleetwoodV8-4.1LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1979 Cadillac FleetwoodV8-5.7L DieselService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1984 Cadillac FleetwoodV8-5.7L DieselService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1980 Cadillac FleetwoodV8-5.7L DieselService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1985 Cadillac FleetwoodV6-4.3L DieselService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1984 Cadillac FleetwoodV8-6.0LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Cadillac Fleetwood Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(32)

Rating Summary
30
2
0
0
0
30
2
0
0
0

Shay

28 years of experience
137 reviews
Shay
28 years of experience
Cadillac Fleetwood V8-5.7L - Fuel Filter - League City, Texas
Shay met my Father to replace his fuel filter and check to see if that was the problem that kept the car from running. Of course, the car started with no problem and kept running. We had Shay go ahead and put the fuel filter on and give us a quote for several other repairs needed on my Dad's Cadillac. Everything went well with the job. My Dad said Shay was very nice and very helpful.

Rodney

36 years of experience
542 reviews
Rodney
36 years of experience
Cadillac Fleetwood V8-4.1L - Turn Signal Switch - Vacaville, California
He came on time and fixed the turn signals like a professional!!!

Paul

23 years of experience
299 reviews
Paul
23 years of experience
Cadillac Fleetwood V8-4.1L - Car is not starting - Tampa, Florida
Awesome! Will def be using him again for getting my hearse up and running properly!

Jeffrey

10 years of experience
7 reviews
Jeffrey
10 years of experience
Cadillac Fleetwood V8-4.5L - Other Inspections - Cupertino, California

Excellent Rating

(32)

Rating Summary
30
2
0
0
0
30
2
0
0
0
Number of Cadillac Fleetwood services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Traction Control Module
Common signs include the Traction Control System (TCS) Light coming on, TCS not turning off/on, and loss of TCS or ABS features.
How Long Does a Parking Brake Release Cable Last?
Your Your car’s parking brake is engaged and disengaged separately from your primary braking system. A steel cable runs from the lever or parking brake cable to the back to activate the brake, and a release cable triggers the mechanism...
P000A OBD-II Trouble Code: "A" Camshaft Position Slow Response Bank 1
P000A code definition This code is known as ‘A’ Camshaft Position Slow Response Bank 1. You may also see a 00010 fault...

How Do the Gaskets in the Engine Protect It and Keep It Working?

Gaskets in an engine are used to seal one part to another due to variations from the machining or casting process. When a part is made, the surface will not be perfectly flat. There are small machining lines and surface...

How do I use the one-touch down window?

The one-touch down power window allows the driver to roll down the window all the way, with just a quick touch of the button. To use the one-touch down power window, press the driver’s Power Window switch down fully, and...

Car idling up and down

This is a common issue. My first instinct would be to look for a vacuum leak. Air going into the engine is metered so that the ECM knows how much fuel to add for a correct mixture. If you have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com