BMW X3 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(488)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(488)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW X3 Power Steering Pressure Hose Replacement is $571 with $403 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 BMW X3L6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1052.04Shop/Dealer Price$1276.11 - $1931.31
2013 BMW X3L6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2610.78Shop/Dealer Price$2923.93 - $3789.74
2015 BMW X3L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2295.90Shop/Dealer Price$2530.78 - $3160.77
2005 BMW X3L6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$1144.21Shop/Dealer Price$1387.04 - $2106.02
2004 BMW X3L6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$1144.21Shop/Dealer Price$1390.39 - $2111.89
2012 BMW X3L6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2610.78Shop/Dealer Price$2926.87 - $3794.88
2016 BMW X3L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2295.90Shop/Dealer Price$2531.04 - $3161.22
2011 BMW X3L6-3.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$2610.78Shop/Dealer Price$2924.36 - $3790.48
Show example BMW X3 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(488)

Rating Summary
454
16
2
4
12
454
16
2
4
12

David

17 years of experience
56 reviews
David
17 years of experience
BMW X3 L6-3.0L - Valve Cover Gasket - Sacramento, California
Great work

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
BMW X3 L6-3.0L - Brake Pad Wear Sensor Replacement - Lafayette, Colorado
Robert is great! Thanks for your service and happy holidays! I appreciate how he took the time to explain everything that he was doing and why.

Anderson

28 years of experience
94 reviews
Anderson
28 years of experience
BMW X3 L4-2.0L Turbo - Oil Change - Brooklyn, New York
friendly and professional and quick!

Albert

16 years of experience
46 reviews
Albert
16 years of experience
BMW X3 L6-3.0L - Ignition Coil - Chino Hills, California
Albert was timely, professional, courteous and knowledgeable. I appreciate his work and professionalism.

Excellent Rating

(488)

Rating Summary
454
16
2
4
12
454
16
2
4
12
Number of BMW X3 services completed
5368+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Radiator
Common signs include leaking coolant, vehicle overheating, sludge, and low coolant.
How Long Does a Transmission Speed Sensor Last?
The The transmission speed sensor measures the RPMs of the shaft of the transmission. While the engine is running, but not moving, then the input shaft of the transmission is not moving either. When the input shaft moves, the transmission...
What Does the Diesel Engine Pre-Glow Warning Light Mean?
The diesel engine pre-glow light turns on while your engine is warming up. If it flashes, an issue has been detected, such as a worn out glow plug.

Drove in manual on accident on freeway for 30 mins.

Hello. It is likely that one of the lower gears were damaged when the transmission was stuck in manual mode. I'm guessing that the gear that it drove was first gear until you got to your destination. Driving in first...

I HAVE 05 300 BASE WITH 2.7L ENGINE VIN R WHAT 3.5L ENGINE DO I LOOK FOR TO PUT IN FOR A SWAP?

There is no "direct" catalog interchange engine for your VIN because your present engine was installed at the factory with an engine specific computer(s), engine wiring harness, suspension (engine weights vary), and so forth. The alteration in weight will require...

Failsafe mode

A scanner has to be applied to look at long and short term fuel trim, the waveform output of the oxygen sensors and other key engine operating parameters. Hesitation is definitely due to a fuel or ignition system fault and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com