BMW 535i GT Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a BMW 535i GT Power Steering Pump Replacement is $1429 with $547 for parts and $882 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$4692.06Shop/Dealer Price$5660.64 - $8477.08
2017 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$4635.30Shop/Dealer Price$5575.74 - $8371.07
2015 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$4635.30Shop/Dealer Price$5584.68 - $8386.73
2016 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$4635.30Shop/Dealer Price$5584.67 - $8386.70
2013 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$2014.32Shop/Dealer Price$2324.69 - $3173.17
2011 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$2014.32Shop/Dealer Price$2309.99 - $3147.45
2012 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$2014.32Shop/Dealer Price$2308.62 - $3145.05
2010 BMW 535i GTL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$2014.32Shop/Dealer Price$2308.44 - $3144.74
Show example BMW 535i GT Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0

Moses

21 years of experience
30 reviews
Moses
21 years of experience
BMW 535i GT L6-3.0L Turbo - Oil Change - Surprise, Arizona
your man was on time pleasant and quick and I very much like your service at my home. However there were oil spill marks in my driveway and on sidewalk that he never brought to my attention, also i expected any future work necessary he would show me then not now via email. the suggestion of tire rotation is sillly since those tires have been on for 2 weeks . Not a deal breaker but i'll ask for william next time.

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
BMW 535i GT L6-3.0L Turbo - Water Pump Replacement - Yorba Linda, California
On time, efficient and my car runs great again!

Michael

28 years of experience
672 reviews
Michael
28 years of experience
BMW 535i GT L6-3.0L Turbo - Oil Change - New River, Arizona
Mike is great. Very knowledgeable and timely.

Michael

28 years of experience
672 reviews
Michael
28 years of experience
BMW 535i GT L6-3.0L Turbo - Spark Plugs - New River, Arizona
Mike dies great work. On time always. Understands my car and it's issues and fixes. Very knowledgable.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0
Number of BMW 535i GT services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Get Ram Dealership Certified
Ram car dealerships offer automotive technician jobs to mechanics who are Ram certified through the MOPAR College Automotive Program.
Car Seat Ratings Systems: What the Numbers Really Mean
Walk Walk into any big box baby store you’ll find a dizzying array of stuff you never imagined that you’d need. Bassinets, footed pajamas, infant tubs - you name it, they have it. They also have rows and rows of...
P0479 OBD-II Trouble Code: Exhaust Pressure Control Valve Intermittent
P0479 code means there is an out-of-the-ordinary voltage reading from the exhaust pressure control valve circuit often due to damaged wiring.

Brakes locking up

The brake pedal being hard to push is telling me that there is a problem with your brake booster. The booster uses engine vacuum to help you apply force to the brake pedal. When the booster is not working this...

Can I get a high output alternator for my car for putting in a bigger amplifier?

Hello. There are aftermarket alternators on the market that you should check the internet for kits for this vehicle so you can install the larger amp. You may find that this large of an amp may require a second battery...

Wondering which way the coolant flows into the heater core and from the water pump 2007 Dodge [Ram 1500](/topics-ram-1500/)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com