BMW 428i xDrive Gran Coupe Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a BMW 428i xDrive Gran Coupe Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 428i xDrive Gran CoupeL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2016 BMW 428i xDrive Gran CoupeL4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example BMW 428i xDrive Gran Coupe Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Brian

23 years of experience
696 reviews
Brian
23 years of experience
BMW 428i xDrive Gran Coupe L4-2.0L Turbo - Brake Pads Replacement (Front) - Jacksonville, Florida
Brian always does an awesome job no matter what car/truck we have we know that Brian will take care of them all 100%!!!

Nik

4 years of experience
2 reviews
Nik
4 years of experience
BMW 428i xDrive Gran Coupe L4-2.0L Turbo - Brake Pads Replacement (Front) - Hawthorne, California
Nik is great he was prompt and courteous. I was skeptical about using this service because I have a foreign car but now I’m ok with it he was informative and made me feel comfortable. I will refer and use the company again only if I get Nik 

Shawn

12 years of experience
315 reviews
Shawn
12 years of experience
BMW 428i xDrive Gran Coupe L4-2.0L Turbo - Canister Purge Solenoid Replacement - Allentown, Pennsylvania
Great Mechanic, knows his stuff, courteous, booked him again for another issue.

Chris

11 years of experience
77 reviews
Chris
11 years of experience
BMW 428i xDrive Gran Coupe L4-2.0L Turbo - Oil Change - Carmel, Indiana
Chris was prompt and gave me an overview when he arrived of what he was going to be doing, ran me through some basic checks and then gave me the opportunity to ask any questions. Chris was professional and efficient and did a great job explaining everything step by step. I would strongly recommend his services to anyone and I would welcome him to do any repairs on my car in the future.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of BMW 428i xDrive Gran Coupe services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Iowa
We We cannot always rely on traffic signals to tell us what to do. Often, we have to deal with unmarked intersections, and when that happens we have to know the right-of-way laws in order to ensure that we avoid...
How to Order a Car From the Manufacturer
Walk into any dealership with a detailed list of specifications you desire, and they most likely won’t have a vehicle in stock that perfectly suits your tastes. Car dealerships (https://www.yourmechanic.com/article/how-to-negotiate-a-better-deal-at-the-car-dealership-by-jason-unrau) often cater to the most popular needs, leaving some drivers...
P0947 OBD-II Trouble Code: Hydraulic Pump Relay Circuit Low
P0947 means there is a low voltage signal in regards to the hydraulic pump relay circuit, possibly due to issues with the transmission fluid.

Clunking/popping sound while turning and going over bumps

Hello. It sounds like you may be having an issue with one of your outer tie rods. The outer tie rods connect the power steering system to the wheels. These tie rods are ball joints but they are not the...

I put 2 quarts of engine oil too much in my car possibly, then a hour later engine came on indicating 02 sensor (bank 2, sensor 1)

Hi Colette. It is very difficult to say for certain if the added oil is what triggered the error code you have described. The O2 sensor is attached to the exhaust system, so added oil should not impact the exhaust...

My 2000 Honda Accord makes a sound every time I turn the wheel. Like a rubbing groaning sound

This may be related to a failing power steering pump (https://www.yourmechanic.com/services/power-steering-pump-replacement) or low power steering fluid (https://www.yourmechanic.com/services/power-steering-fluid-service) levels. As you may know, the power steering system uses a pump, normally driven by a belt. The pump supplies pressure as it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com