BMW 135i Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a BMW 135i Car Battery Replacement is $353 with $258 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$630.79Shop/Dealer Price$777.24 - $1177.22
2010 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$620.29Shop/Dealer Price$768.53 - $1169.84
2009 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$620.29Shop/Dealer Price$768.52 - $1169.84
2011 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$620.29Shop/Dealer Price$768.48 - $1169.76
2013 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$757.30 - $1157.32
2008 BMW 135iL6-3.0L TurboService typeCar Battery ReplacementEstimate$620.29Shop/Dealer Price$768.52 - $1169.84
Show example BMW 135i Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(32)

Rating Summary
29
2
0
1
0
29
2
0
1
0

Hernandes

5 years of experience
19 reviews
Hernandes
5 years of experience
135i 2012 - Oil Change - Cupertino, CA
Nice guy

Breck

15 years of experience
760 reviews
Breck
15 years of experience
135i 2008 - Serpentine/Drive Belt - Houston, TX
Great mechanic, very professional and polite. Arrived early and did an excellent job. Highly recommend. Will request for any future mechanical needs.

Carlos

23 years of experience
467 reviews
Carlos
23 years of experience
135i 2008 - Brake Rotor/Disc - Highland, CA
Very good

AL

8 years of experience
232 reviews
AL
8 years of experience
135i 2013 - Valve cover gasket is leaking - Satellite Beach, FL
He was very flexible.

Excellent Rating

(32)

Rating Summary
29
2
0
1
0
29
2
0
1
0
Number of BMW 135i services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Mini Countryman
If If you’ve always wanted a Mini Cooper, but couldn’t reason giving up so many practical features, you’re not alone. That’s why, in 2012, BMW added the Countryman to its lineup. As a subcompact crossover SUV, this vehicle should make...
Symptoms of a Bad or Failing Oil Filter Housing Gasket
Common signs include the Engine Oil Light coming on, oil dripping from the filter, and lower than normal oil pressure.
The Guide To Colored Curb Zones in New York
New New York parking laws: understanding the basics If you are a licensed driver in the state of New York, you are likely well aware of the various laws regarding the roads. You know the speed limits and you know...

Car only starts when I pump the gas pedal.

From this description it seems that there could be separate issues happening to your Mitsubishi Eclipse. The three most common reasons I see for a car unable to start without pushing the gas pedal include; the throttle body gasket may...

Car pulls to the right after replacing the driver side rear tire.

Logically, if the car started pulling immediately AFTER you put a new tire on the rear, it would seem unlikely that the pulling is due to an alignment issue. Uneven tire inflation will cause pulling so do check to make...

Could it be because of transmission that car lose power and won't move now into drive or reverse but engine is fine and functional

Hi Danielle. Thanks for contacting us today. There could be a few issues causing this problem, ranging from an inner transmission seal leak, a shift solenoid failure or other internal transmission components being damaged. This is something that a professional...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com