Audi Q7 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(232)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(232)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Audi Q7 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Audi Q7V6-3.0L TurboService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2018 Audi Q7L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Audi Q7V6-3.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Audi Q7V6-3.0L Turbo DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2009 Audi Q7V6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2010 Audi Q7V8-4.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 Audi Q7V6-3.0L TurboService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2021 Audi Q7V6-3.0L Turbo HybridService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Audi Q7 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(232)

Rating Summary
217
5
2
1
7
217
5
2
1
7

David

16 years of experience
636 reviews
David
16 years of experience
Audi Q7 V6-3.6L - Serpentine/Drive Belt Replacement - Pleasant Hill, California
Great Job

Michael

6 years of experience
134 reviews
Michael
6 years of experience
Audi Q7 V6-3.6L - Warning Light is on - Seattle, Washington
Michael is very professional knowledgeable thanks michael

Hiram

25 years of experience
55 reviews
Hiram
25 years of experience
Audi Q7 V6-3.6L - Drive Belt Tensioner Replacement - Cypress, Texas
Promptly arrived and finished the work well within schedule. Top class professional work.

Shaun

16 years of experience
238 reviews
Shaun
16 years of experience
Audi Q7 V6-3.0L Turbo Diesel - Brake System Flush - San Jose, California
This is professional enough (European car experienced) mechanic YourMechanic, you won't regret servicing your car by him!

Excellent Rating

(232)

Rating Summary
217
5
2
1
7
217
5
2
1
7
Number of Audi Q7 services completed
2552+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Do I Check My Tire Pressure?
Checking Checking air pressure on your tires is part of basic car maintenance. Check your tires once a week and before any long trips. You may use a tire pressure gauge to measure accurately, or just look closely to see...
How to Detail Your Car with a Clay Bar
Clay bar detailing gives your car exterior a smooth and shiny surface. Clean and prepare the car body before you use a clay bar on your car exterior.
How to Get Smog Technician Certified in Pennsylvania
Automotive technician jobs include smog certified emissions inspectors. In Pennsylvania, you must attend a refresher course and pass a written test.

ABS light comes on sporadically and the right rear suspension shock absorber is leaking.

Hello. Best first step would be to get an ABS scanner hooked up and extract the problem codes from the ABS system. This may be as simple as a malfunctioning wheel speed sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement). In N. America, this model (badged...

Ignition key won't turn

I have a 2006 Hyundai Sonata that started having slot of issues. Mainly rough shifting and vibration while in gear.(but only low to no speeds) would a broken ignition condenser cause this?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com