Audi Allroad Quattro Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Audi Allroad Quattro Valve Cover Gasket Replacement is $581 with $189 for parts and $392 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2003 Audi Allroad QuattroV6-2.7L Turbo	Service typeValve Cover Gasket Replacement	Estimate$812.66	Shop/Dealer Price$924.97 - $1222.19
2004 Audi Allroad QuattroV6-2.7L Turbo	Service typeValve Cover Gasket Replacement	Estimate$875.03	Shop/Dealer Price$980.60 - $1272.78
2004 Audi Allroad QuattroV8-4.2L	Service typeValve Cover Gasket Replacement	Estimate$987.77	Shop/Dealer Price$1118.35 - $1484.49
2005 Audi Allroad QuattroV6-2.7L Turbo	Service typeValve Cover Gasket Replacement	Estimate$787.43	Shop/Dealer Price$891.20 - $1182.02
2005 Audi Allroad QuattroV8-4.2L	Service typeValve Cover Gasket Replacement	Estimate$987.77	Shop/Dealer Price$1127.37 - $1500.27
2003 Audi Allroad QuattroV8-4.2L	Service typeValve Cover Gasket Replacement	Estimate$987.77	Shop/Dealer Price$1119.21 - $1485.99
2002 Audi Allroad QuattroV6-2.7L Turbo	Service typeValve Cover Gasket Replacement	Estimate$787.43	Shop/Dealer Price$891.28 - $1182.16
2001 Audi Allroad QuattroV6-2.7L Turbo	Service typeValve Cover Gasket Replacement	Estimate$787.43	Shop/Dealer Price$891.20 - $1182.02

Show example Audi Allroad Quattro Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(16)

Rating Summary

15

1

0

0

0

15

1

0

0

0

SEE REVIEWS NEAR ME

Duane

20 years of experience

545 reviews

Duane

20 years of experience

by Daniel Plouffe

Allroad Quattro 2005 - Brakes, Steering and Suspension System - Cardiff By The Sea, CA

Duane is the man. He goes above and beyond to help out and make you feel comfortable. He is much more thorough than some of the indie shops I have been to. He takes the time do things like use using gauges to measure play in bushings as compared to indie shops that try to feel it by hand.

Excellent Rating

(16)

Rating Summary

15

1

0

0

0

15

1

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

P0120 OBD-II Trouble Code: TPS "A" Circuit Malfunction

P0120 P0120 code definition Throttle Pedal Position Sensor/Switch (TPS) "A" Circuit Malfunction What the P0120 code means P0120 is the generic OBD-II code which indicates that the Engine Control Module (ECM) has seen the TPS sensor circuit A output voltage...

Symptoms of a Bad or Failing EGR Vacuum Modulator

Common signs include engine performance issues, the Check Engine Light coming on, and failing an emissions test.

How to Replace an Oil Return Hose on Most Cars

The oil in the engine travels through oil return hoses which fail when there are cracks or bulges on the hoses or oil is leaking from the car.

P0420 code after idle relearn

Hi and thanks for contacting Your Mechanic. The P0420 code usually means that the catalytic converter has failed, however, it also relates to a mixture of fuel and air that is causing the catalytic converter to heat up too much....

What causes the fuel pump to keep burning out?

The first thing to come to mind is the quality (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-fuel-pump) of your replacement pumps. There are many manufacturers in the business of making inferior pumps and selling them for a tempting price. These are often what you get at...

Heat not coming out hot

This can be caused by the heater core having a partial blockage or by the temperature blend door on passenger side going to cold. You will need to have actuator checked first and then if it i moving door to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com