Audi A6 Quattro Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Car Battery Replacement Estimate for Audi A6 Quattro

Audi A6 Quattro Car Battery Replacement costs $324 on average.

CarServiceEstimateShop/Dealer Price
2021 Audi A6 QuattroL4-2.0L Turbo HybridService typeCar Battery ReplacementEstimate$629.99Shop/Dealer Price$778.99 - $1194.49
2006 Audi A6 QuattroV6-3.2LService typeCar Battery ReplacementEstimate$574.31Shop/Dealer Price$719.62 - $1106.66
2009 Audi A6 QuattroV6-3.0L TurboService typeCar Battery ReplacementEstimate$574.31Shop/Dealer Price$719.62 - $1106.66
2012 Audi A6 QuattroV6-3.0L TurboService typeCar Battery ReplacementEstimate$574.31Shop/Dealer Price$719.58 - $1106.59
2017 Audi A6 QuattroL4-2.0L TurboService typeCar Battery ReplacementEstimate$498.49Shop/Dealer Price$615.55 - $938.75
2011 Audi A6 QuattroV6-3.0L TurboService typeCar Battery ReplacementEstimate$574.31Shop/Dealer Price$719.62 - $1106.66
2005 Audi A6 QuattroV6-3.2LService typeCar Battery ReplacementEstimate$579.31Shop/Dealer Price$724.38 - $1111.24
2016 Audi A6 QuattroL4-2.0L TurboService typeCar Battery ReplacementEstimate$579.31Shop/Dealer Price$725.04 - $1112.38
Show example Audi A6 Quattro Car Battery Replacement prices

Car Battery Replacement Service

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Manuel

25 years of experience
511 reviews
Manuel
25 years of experience
A6 Quattro 2007 - Battery - Long Beach, CA
Great service right on time!

Caz

13 years of experience
86 reviews
Caz
13 years of experience
A6 Quattro 2011 - Spark Plugs - Atlanta, GA
Very quick and convenient!

Ramiro

0 years of experience
76 reviews
Ramiro
0 years of experience
A6 Quattro 2013 - Oil Change - Sammamish, WA
Ramiro did a great job. He was timely, professional, didn't leave a mess for me to deal with. Highly recommend his services.

Collins

8 years of experience
362 reviews
Collins
8 years of experience
A6 Quattro 2007 - Car will not turn over - Atlanta, GA
Very helpful from start to finish.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Audi A6 Quattro Battery Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Long Block vs. Short Block Engines: What’s the Difference?
Depending on the damage to your engine, replace it with a short block or long block engine if it’s less than the resell value of your car.
P0439 OBD-II Trouble Code: Catalyst Heater Control Circuit
Trouble code P0439 means the catalyst heater control circuit has sent the PCM a below-acceptable voltage reading.
What Does the Low Fuel Level Warning Light Mean?
The low fuel level light warns you when your car is nearing an empty tank of gas. It should be refilled before driving several more miles.

My 03 navigator leaked s brownish fluid and now it doesnt move

Hello, thank you for writing in. Due to the fluid found, we need to find and identify the cause of the leak first and foremost. This can be done by tracing it from where the fluid was found, or by...

Timing marks on a Chrysler 300 V6 3.5 liter. Help with putting a timing belt on.

As long as the camshafts did not turn and the timing marks are the same, then there is no issue and the timing marks are lined up properly. If you need further assistance with your timing belt, then seek out...

Brake lights stay on

Your brake pedal may not be returning all the way. Because the switch is activated by the motion of the pedal, if the pedal does not swing back all the way to it's stop, it may not turn off the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com