Audi 5000 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(2,238)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(2,238)

Power Steering Pressure Hose Replacement Estimate for Audi 5000

Audi 5000 Power Steering Pressure Hose Replacement costs $497 on average.

CarServiceEstimateShop/Dealer Price
1987 Audi 5000L5-2.3LService typePower Steering Pressure Hose ReplacementEstimate$845.05Shop/Dealer Price$1058.32 - $1642.99
1983 Audi 5000L5-2.0L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$1215.31Shop/Dealer Price$1520.87 - $2388.66
1981 Audi 5000L5-2.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$835.05Shop/Dealer Price$1045.55 - $1628.14
1985 Audi 5000L5-2.2LService typePower Steering Pressure Hose ReplacementEstimate$835.05Shop/Dealer Price$1045.51 - $1628.07
1984 Audi 5000L5-2.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$835.05Shop/Dealer Price$1045.57 - $1628.19
1982 Audi 5000L5-2.2LService typePower Steering Pressure Hose ReplacementEstimate$835.05Shop/Dealer Price$1045.55 - $1628.14
1986 Audi 5000L5-2.2LService typePower Steering Pressure Hose ReplacementEstimate$840.05Shop/Dealer Price$1050.31 - $1632.72
1981 Audi 5000L5-2.2LService typePower Steering Pressure Hose ReplacementEstimate$840.05Shop/Dealer Price$1050.96 - $1633.86
Show example Audi 5000 Power Steering Pressure Hose Replacement prices

Power Steering Pressure Hose Replacement Service

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,238)

Rating Summary
2,076
83
18
9
52
2,076
83
18
9
52

David

27 years of experience
182 reviews
David
27 years of experience
Audi A6 Quattro V6-3.2L - Power Steering Pressure Hose - San Mateo, California
Excellent customer service....he called to update me on his schedule and arrival time. Was flexible with my schedule and stayed well past the designated appt. time to finish the entire job.

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Audi S3 L4-2.0L Turbo - Pre-purchase Car Inspection - Evans, Georgia
Knows exactly what he is talking about when it comes to vehicles. Just needed him to do prepurchase inspection for a new vehicle acquired (Audi S3). Was able to assist me with any questions as well.

Ruben

14 years of experience
86 reviews
Ruben
14 years of experience
Audi A5 Quattro L4-2.0L Turbo - Battery - Los Angeles, California
Very fast and friendly.

Chris

22 years of experience
2124 reviews
Chris
22 years of experience
Audi A4 L4-1.8L Turbo - Check Engine Light is on - Anaheim, California
Very good and helpful I would like him to do the work on my vehicle again thank you chris

Excellent Rating

(2,238)

Rating Summary
2,076
83
18
9
52
2,076
83
18
9
52
Number of Audi services completed
24618+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Use the OnStar RemoteLink App on Your Smart Phone
OnStar is a driver-assist tool built into many GM vehicles. The OnStar RemoteLink app for smart phones allows drivers to find places or unlock doors.
How to Replace an Exhaust Gas Recirculation (EGR) Cooler
Exhaust gas recirculation (EGR) coolers lower the temperature of the exhaust gas before it enters the car engine. EGR coolers are mainly for diesel.
P2002 OBD-II Trouble Code: Diesel Particulate Filter Efficiency Below Threshold Bank 1
P2002 means there is an efficiency issue with the particulate filter in the exhaust, likely due to a faulty filter or sensor, or exhaust leak.

Was wondering how much a transmission would roughly cost for my 2008 mercury mariner 2.3L I-4 engine 4cylin.

Hi Jacob. A refurbished & rebuilt transmission for these vehicles can cost roughly $1,500 in most cases, plus about $600 or more for installation. I would be wary based on the fact that the mechanic did not provide you with...

97 Ford F-150 4x4 shifting problem when wet

Hello, you have an electrical issue. The powertrain computer needs inputs to control the transmission shift points. The OSS(output speed sensor ) which reads in MPH on your speedometer. If a connector or wiring is directly exposed to water it...

2006 Xterra 4x4, 4.0L V6. Engine is overheating. No coolant leaks. Replaced thermostat. Flushed radiator. Fans work. What to do?

Hello, thank you for writing in. Overheating issues are very frustrating. When in this situation, you will want to go ahead and test the radiator cap and make sure it is regulating pressure correctly. Secondly, the water pump needs to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com