Audi 5000 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,385)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,385)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Audi 5000 Brake Master Cylinder Replacement is $226 with $131 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Audi 5000L5-2.2L TurboService typeBrake Master Cylinder ReplacementEstimate$377.25Shop/Dealer Price$460.32 - $670.14
1987 Audi 5000L5-2.2LService typeBrake Master Cylinder ReplacementEstimate$357.25Shop/Dealer Price$440.35 - $650.19
1980 Audi 5000L5-2.2LService typeBrake Master Cylinder ReplacementEstimate$692.63Shop/Dealer Price$859.57 - $1320.95
1986 Audi 5000L5-2.2L TurboService typeBrake Master Cylinder ReplacementEstimate$357.25Shop/Dealer Price$440.31 - $650.12
1984 Audi 5000L5-2.2LService typeBrake Master Cylinder ReplacementEstimate$692.63Shop/Dealer Price$859.60 - $1321.00
1985 Audi 5000L5-2.2L TurboService typeBrake Master Cylinder ReplacementEstimate$357.25Shop/Dealer Price$440.35 - $650.19
1988 Audi 5000L5-2.2L TurboService typeBrake Master Cylinder ReplacementEstimate$362.25Shop/Dealer Price$445.11 - $654.77
1980 Audi 5000L5-2.2L TurboService typeBrake Master Cylinder ReplacementEstimate$697.63Shop/Dealer Price$864.99 - $1326.67
Show example Audi 5000 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56

Wayne

31 years of experience
102 reviews
Wayne
31 years of experience
Audi A4 Quattro L4-1.8L Turbo - Coolant is leaking - King Of Prussia, Pennsylvania
Excellent work

Michael

25 years of experience
199 reviews
Michael
25 years of experience
Audi TT Quattro L4-1.8L Turbo - 75 Point Safety Inspection - Charlotte, North Carolina
Very thorough, would definitely recommend.

Alfred

13 years of experience
499 reviews
Alfred
13 years of experience
Audi Q5 L4-2.0L Turbo - 65,000 Miles Maintenance Service - Oakland, California
On time, personable, great work. Pointed out a few things I should take care of.

Carlos

16 years of experience
362 reviews
Carlos
16 years of experience
Audi A4 Quattro V6-2.8L - Headlight Switch Replacement - Fort Worth, Texas
I was contacted by Carlos shortly after service was requested. Additional info was requested and had a phone call before he arrived. I was showed the replacement part and he went to work. All work was done in a timely manner and area was left neat and clean. I was shown the defected part and the condition it was in. Thank you for your professionalism and expertise in taking care of my vehicle. I will call for future maintenance on my car and my wife's vehicle.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56
Number of Audi services completed
26235+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Filters Keep Your Car Clean Under the Hood
Your Your car has three different types of filters that work to keep the contaminants, debris, and impurities out of the fuel system, engine air supply system and car cabin air supply. They are the oil filter, air filter, and...
P0346 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Range/Performance (Bank 2)
P0346 P0346 code definition The appearance of the P0346 code indicates that the PCM has detected an incorrect voltage or waveform reading from the engine bank 2 camshaft sensor A camshaft position sensor circuit. What the P0346 code means The...
P3412 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit High
P3412 means the cylinder valve control circulation is reading high due to electrical problems, bad sensor or solenoid, or low oil pressure.

How do I adjust the cruise control speed?

Once the cruise control is set, you can adjust the speed very easily. To increase the cruise control speed, pull up on the cruise control lever. To decrease the speed, pull down on the cruise control lever. If you briefly...

Problems starting my car

Hi. Usually a high pitched noise would narrow the diagnosis down to either a pulley issue or belt issue. I recommend having a certified mechanic, such as one from YourMechanic, listen to the noise (https://www.yourmechanic.com/services/loud-screeching-noise-when-i-start-the-car-inspection) to see why your car...

Leaking coolant out of radiator drain tube

If you are referencing to the radiator drain tube then you need to check to make sure the radiator drain valve is in the closed position. If the drain valve to the radiator is closed and still leaking then try...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com