Toyota Supra Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Toyota Supra Power Steering Pump Replacement is $527 with $289 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Toyota SupraL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1148.56Shop/Dealer Price$1375.95 - $2044.33
1993 Toyota SupraL6-3.0LService typePower Steering Pump ReplacementEstimate$1147.84Shop/Dealer Price$1372.41 - $2038.68
1994 Toyota SupraL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1147.84Shop/Dealer Price$1372.45 - $2038.76
1998 Toyota SupraL6-3.0LService typePower Steering Pump ReplacementEstimate$1133.24Shop/Dealer Price$1357.67 - $2023.83
1994 Toyota SupraL6-3.0LService typePower Steering Pump ReplacementEstimate$1147.84Shop/Dealer Price$1375.10 - $2043.40
1997 Toyota SupraL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1133.24Shop/Dealer Price$1357.91 - $2024.25
1992 Toyota SupraL6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1808.45Shop/Dealer Price$2163.62 - $3217.31
1991 Toyota SupraL6-3.0LService typePower Steering Pump ReplacementEstimate$1033.51Shop/Dealer Price$1194.90 - $1667.35
Show example Toyota Supra Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0

Travis

16 years of experience
165 reviews
Travis
16 years of experience
Toyota Supra L6-3.0L Turbo - Car Starter Repair - Carrollton, Texas
Travis is awesome! He is an extremely knowledgeable car geek that loves his job. I definitely recommend him! I will be requesting him in the future.

George

27 years of experience
55 reviews
George
27 years of experience
Toyota Supra L6-3.0L Turbo - Pre-purchase Car Inspection - Spring, Texas
Very knowledgeable, on time (early), and answered all my questions.

Anthony

29 years of experience
114 reviews
Anthony
29 years of experience
Toyota Supra L6-3.0L Turbo - Parking brake is stuck - Yaphank, New York
Anthony was friendly, very capable and a real pleasure to work with!

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Toyota Supra L6-3.0L - Starter - Redmond, Washington
The was on time, got to work. Got the job done and gave a list of other items for me to repair ok n the future.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0
Number of Toyota Supra services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in New Jersey
Most Most traffic accidents in the state of New Jersey occur when one motorist fails to yield the right of way to another, or to a pedestrian. Common sense dictates that you should do everything you can to avoid an...
10 Best Car Tire Gauges
Maintaining good tire pressure keeps you safe on the road. The Tekton digital tire gauge provides accurate readings with a single press of a button.
A Buyer’s Guide to the 2012 Toyota FJ Cruiser
If If you’re looking for a hint of nostaligia in an SUV that can actually handle off-roading like a pro, the 2012 Toyota FJ Cruiser is the perfect choice for you. Designed specifically for tackling those off-road jaunts, what this...

Air con sound knocking

If your air conditioning compressor is making a knocking sound the best thing to do would be to have it replaced by a qualified professional. It is very bad on the engine to run the air conditioning when the compressor...

Leaking coolant no signs of leak anywhere 2006 Scion tC

Hi - this problem sounds a bit more challenging as you have done all the logical things - well done! Remaining possibilities include coolant leaking into the exhaust (cracked cylinder head) which would give you white smoke with a sweet...

Infiniti G35 stuck in limp mode. Codes for transmission solenoid valve. Can I replace valve body myself?

This would depend on how proficient you are witg transmisson work. I would recommend doing some research on this particular repair. If you are in doubt about this repair, i would recommend having the job done by a qualified professional....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com