Toyota RAV4 Prime Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16,906)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16,906)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Toyota RAV4 Prime Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Toyota RAV4 PrimeL4-2.5L HybridService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 Toyota RAV4 PrimeL4-2.5L HybridService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Toyota RAV4 Prime Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(16,906)

Rating Summary
15,903
597
109
72
225
15,903
597
109
72
225

Glenn

19 years of experience
77 reviews
Glenn
19 years of experience
Toyota Camry L4-2.2L - Oil level is low - Fort Washington, Maryland
He explained everything that needed to be done, what was good and what was bad. He explained so I could understand. Great attitude and focused. Very good.

Andrew,

5 years of experience
161 reviews
Andrew,
5 years of experience
Toyota Avalon V6-3.5L - Car Battery Replacement - Dallas, Texas
professional, knowledgeable, efficient and pleasant.

Rod

17 years of experience
210 reviews
Rod
17 years of experience
Toyota Corolla L4-1.8L - Brake Master Cylinder - Boca Raton, Florida
Great service, on-time, with an honest and trustworthy demeanor. I would recommend Rod as a mechanic to friends and would use him and "Your Mechanic" in the future.

Choeun

15 years of experience
181 reviews
Choeun
15 years of experience
Toyota Corolla L4-1.8L - Exhaust Manifold - Stockton, California
He was Great ! Perfectly on time and very thorough and professional.

Excellent Rating

(16,906)

Rating Summary
15,903
597
109
72
225
15,903
597
109
72
225
Number of Toyota services completed
185966+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volkswagen Golf
The The 2012 Volkswagen Golf offers comfort and an elegant design for a variety of transportation needs. The Golf is a solid vehicle, good size, and great value, especially when it comes to comparing prices of similar vehicles. Key Features...
How Long Does a Yaw Rate Sensor Last?
While While taking a curve at a high rate of speed seems like fun, it can also be quite dangerous. Luckily, there are a number of systems on a car that can make taking hairpin turns quickly much safer. The...
P0547 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 1
P0547 means that the PCM is reading a malfunction in the exhaust gas temperature sensor circuit due to faulty wiring, sensor issues or exhaust leaks.

Front rotors are wearing way too fast

Brake performance and wear reduction are two very popular modification questions for most vehicles. There are many options available that can extend the life of the rotors and/or pads. Look for rotors that are drilled and/or slotted. These types of...

Number one coil melting down

I would say that there is some sort of malfunction with either the control side of your coil that is causing the coil to stay energized or there is a problem with your spark plug. If the spark plug has...

I just had a air mass filter sensor put in my car 2011 on Nissan Altima plus a new air filter and the check engine soon light came on.

Hi there. Check the harness to the mass air flow sensor (MAF) and see if its connected correctly. Check all of the clamps around the sensor and make sure that they are all tight. The light is still coming on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com