Pontiac G3 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Pontiac G3 Water Pump Replacement is $564 with $186 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac G3L4-1.6LService typeWater Pump ReplacementEstimate$789.64Shop/Dealer Price$892.15 - $1177.79
2010 Pontiac G3L4-1.6LService typeWater Pump ReplacementEstimate$765.31Shop/Dealer Price$863.05 - $1145.12
Show example Pontiac G3 Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0

Omar

13 years of experience
287 reviews
Omar
13 years of experience
Pontiac G3 L4-1.6L - Brake Hose Replacement (Driver Side Front) - Fort Lauderdale, Florida
First time geting service using yourmechanic and the service was excellent. Omar was very friendly and professional.

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Pontiac G3 L4-1.6L - Oil Change - Las Vegas, Nevada
paul did good job

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Pontiac G3 L4-1.6L - Oil Change - Las Vegas, Nevada
very good

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Pontiac G3 L4-1.6L - Oil level is low - Las Vegas, Nevada
very good

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0
Number of Pontiac G3 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

B1946 OBD-II Trouble Code: Climate Control A/C Post Evaporator Sensor Circuit Failure
B1946 means there is a defect in the evaporator temperature sensor for the climate control system, likely due to a faulty sensor or damaged wiring.
How Long Does an AC Accumulator Last?
Your Your vehicle’s air conditioning system is a complex system of components, each of which plays an important role. However, not all the components will continue to work properly if they come into contact with moisture, and that is where...
P0366 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Range/Performance (Bank 1)
P0366 P0366 code definition The P0366 code is defined as an incorrect voltage reading from the camshaft position sensor circuit, specifically for the engine bank 1 camshaft sensor B. What the P0366 code means In order to control fuel injection...

What would cause an engine mount to shear off?

Hello, motor mounts have a big job to perform. Think of a motor mount as the cushion insole of your shoes, and how the shoes feel after 3 months of continuous use. The motor mount is piece of rubber that...

Clutch doesn't work

The clutch master cylinder supplies pressure from your foot to the clutch slave cylinder. A fluid leak at the master or the slave cylinders would indicate the problem. I would recommend inspecting the fluid level and adjustment. A fluid bleeding...

Loss of power

It looks like there can be a variety of reasons as to why your Chevy Monte Carlo is losing power under acceleration. These reasons include a fault in the ignition system, low fuel pressure or even a vacuum leak being...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com