Nissan 280ZX Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan 280ZX Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1982 Nissan 280ZXL6-2.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1981 Nissan 280ZXL6-2.8L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Nissan 280ZXL6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1981 Nissan 280ZXL6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1979 Nissan 280ZXL6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1982 Nissan 280ZXL6-2.8L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Nissan 280ZXL6-2.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1983 Nissan 280ZXL6-2.8L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Nissan 280ZX Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Jimmi

27 years of experience
232 reviews
Jimmi
27 years of experience
Nissan 280ZX L6-2.8L - Clutch Master Cylinder & Slave Cylinder Replacement - Winter Springs, Florida
Prompt and professional.

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Nissan 280ZX L6-2.8L - Coolant is leaking - San Diego, California
Chet knew his stuff and quickly diagnosed the problem.

James

41 years of experience
105 reviews
James
41 years of experience
Nissan 280ZX L6-2.8L - Pre-purchase Car Inspection - Beachwood, Ohio
Very thorough inspection. James called me prior to the appointment to get some details and called me after to discuss. I really appreciated his honesty and commitment to his work. Would definitely recommend to anyone.

Michael

21 years of experience
244 reviews
Michael
21 years of experience
Nissan 280ZX L6-2.8L - Car is not starting - Fontana, California
Great guy

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Nissan 280ZX services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Steering Column
Common signs include steering tilt not locking, clicking or grinding sounds while turning, and the steering wheel operating roughly.
How Long Does a Surge Tank Hose Last?
Your Your car’s coolant system is responsible for helping to keep the engine at the correct operating temperature. Overheating can cause serious damage, so coolant is used to absorb heat from the engine and then disperse it into the atmosphere....
P3440 OBD-II Trouble Code: Cylinder 5 Exhaust Valve Control Circuit High
P3440 means there is a problem with the cylinder deactivation system due to bad lifters, low oil pressure or a faulty sensor or solenoid.

P0170 and P0173, I have changed the MAF and Both sensors. Now my car does not start.

P0170 and 173 indicate that your fuel mixture is off. The ECU tries to compensate, but the error is so large that it cant make the correction. It can be caused by a Mass Air Flow sensor, but there could...

Would a used transmission have to be programmed with my vin #

More and more automobile parts are being tagged electronically with the VIN. This is ostensibly done to make it hard for chop shops who steal cars and sell them piece by piece to the repair market. I've not run into...

My abs/traction speed sensors went by not in will not pull in drive

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com