Mercury Mystique Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mercury Mystique Car Thermostat Replacement is $230 with $90 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Mercury MystiqueL4-2.0LService typeCar Thermostat ReplacementEstimate$334.32Shop/Dealer Price$382.75 - $519.94
1996 Mercury MystiqueV6-2.5LService typeCar Thermostat ReplacementEstimate$387.61Shop/Dealer Price$435.98 - $575.32
1997 Mercury MystiqueL4-2.0LService typeCar Thermostat ReplacementEstimate$325.31Shop/Dealer Price$372.00 - $507.88
1995 Mercury MystiqueL4-2.0LService typeCar Thermostat ReplacementEstimate$325.31Shop/Dealer Price$372.00 - $507.88
1995 Mercury MystiqueV6-2.5LService typeCar Thermostat ReplacementEstimate$387.61Shop/Dealer Price$438.07 - $578.99
1998 Mercury MystiqueV6-2.5LService typeCar Thermostat ReplacementEstimate$387.61Shop/Dealer Price$436.21 - $575.72
1996 Mercury MystiqueL4-2.0LService typeCar Thermostat ReplacementEstimate$325.31Shop/Dealer Price$372.01 - $507.91
1999 Mercury MystiqueL4-2.0LService typeCar Thermostat ReplacementEstimate$325.31Shop/Dealer Price$372.00 - $507.88
Show example Mercury Mystique Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(16)

Rating Summary
14
2
0
0
0
14
2
0
0
0

Richard

22 years of experience
15 reviews
Richard
22 years of experience
Mercury Mystique V6-2.5L - Car is not starting - San Jose, California
This is my first time working with richard! he did a fantastic job he was able to explaining to me in great detail what was wrong with my car. richard thank you so very much

AL

13 years of experience
245 reviews
AL
13 years of experience
Mercury Mystique V6-2.5L - Alternator - Denver, Colorado
very professional and knowledgeable!!!

Randy

23 years of experience
138 reviews
Randy
23 years of experience
Mercury Mystique V6-2.5L - Car is not starting - North Fort Myers, Florida
Knowledgeable friendly a pleasure

Kahlin

18 years of experience
41 reviews
Kahlin
18 years of experience
Mercury Mystique V6-2.5L - Car is not starting - Chula Vista, California

Excellent Rating

(16)

Rating Summary
14
2
0
0
0
14
2
0
0
0
Number of Mercury Mystique services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Rules of the Road For Delaware Drivers
While While you may know the rules of the road in the state in which you live, that does not mean that each state you visit or even move to will have the same laws. If you are planning to...
How to Use a Gas Station Car Wash
It It is inevitable that your vehicle will need to be washed, and it’s convenient to do so when you go to a gas station to fuel up. Many gas stations have a car wash on site, whether it is...
How to Replace a Car Trunk Light Bulb
Car trunks are lit by a trunk light for both convenience and safety. Replacing a bad bulb is important for nighttime emergency roadside situations.

Radiator out and car not starting.

Hello, you say your radiator went out so i am assuming that the radiator was leaking and the car overheated at one point. Water was probably added to top up the system so the car is drivable. If I am...

Car initially fine after cleaning injectors.

The rotary engines have twin rotors that have what is called apex seals the give these engines the compression to run. These seals are a known failure that can cause no start, low power and fouling of the plugs. You...

Hard to steer g6 gt 3.5 at low speeds

Hi There, This suggests your power steering pump may be failing or you have a leak elsewhere in one of the power steering lines. The power steering (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection) system operates on very high pressurized hydraulic pressure (in some cases as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com