Mercedes-Benz ML250 Car is taking longer than normal to stop Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,600)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,600)

Car is taking longer than normal to stop Inspection Service

How much does a Car is taking longer than normal to stop Inspection cost?

On average, the cost for a Mercedes-Benz ML250 Car is taking longer than normal to stop Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeCar is taking longer than normal to stop InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz ML250 Car is taking longer than normal to stop Inspection prices

Most of us are so accustomed to how automotive brake systems work that we take them for granted. When you press the brake pedal, your car should slow down and stop. What’s more, it should do that in a normal amount of time. Of course, braking time varies on a number of factors, including vehicle weight, road conditions, speed and more, but drivers can usually estimate the amount of time needed for their car. If it seems to be taking longer than normal to stop, there may be a problem with the system.

How this system works:

Your brake system works on a relatively simple principle, although it requires a significant number of components in order to do its job. Fluid pressure and friction are the two primary factors here. Fluid pressure is created by the booster and master cylinder.

Pressurized brake fluid is then sent through your brake lines to the caliper, which squeezes the rotor between two brake pads – an inner pad and an outer pad. This creates friction. The material used in brake pad manufacturer is specially designed to withstand the high heat and pressure created.

However, pads and rotors do wear out over time. Additionally, significant heat can create problems like “brake fade”, which can result in longer stopping distances.

Common reasons for this to happen:

  • Worn Brake Pads: The most common cause of a car taking longer than normal to stop is simple brake wear. If it has been some time since your pads were changed and your rotors resurfaced, it might be a wise decision to have that service done now.

  • Brake Fade: Brake fade is noticeable in many situations, but the best example is driving down a curving mountain road that’s descending. You’re generally forced to keep your foot on the pedal and “ride” your brakes. This creates immense amounts of heat that affect the pads and rotors, resulting in reduced braking performance and longer stopping times. Brake fade is generally a temporary condition. When the pads and rotors cool, they should be back to almost normal.

  • Low Fluid Level: Your brakes work on hydraulic pressure. This means that fluid is required for them to operate. If the fluid is low, you’ll notice that it takes you longer to stop than normal. If the fluid level gets too low, the brakes won’t work at all.

  • Stuck Caliper: In order for your brakes to slow and stop your car normally, both front calipers need to be in good working condition. If your car takes longer than normal to stop, it could mean that one of the calipers is seized or not sliding on the slide pins correctly.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system, including the condition of the pads and rotors, the level of the fluid and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

Our mechanic will need to inspect the entire brake system, starting with the pads and rotors. The condition of the pads, rotors and calipers will be noted, and the mechanic will also inspect the master cylinder and the level of the brake fluid in the system.

How important is this service?

If your car is taking longer to stop than usual, it’s not a good sign. While it might be temporary brake fade due to high heat and riding your brakes, it may be a sign of a deeper problem. You should have your brakes regularly inspected during all basic maintenance (such as oil changes) and keep an eye on the condition of the system. If you’re experiencing any unusual brake performance, our professional mechanics can have the problem diagnosed and repaired in no time.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,600)

Rating Summary
5,210
189
54
28
119
5,210
189
54
28
119

Chris

22 years of experience
2239 reviews
Chris
22 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Brake Pads Replacement (Front, Rear) - Trabuco Canyon, California
Great job, showed up on time, completed the work on time for far less than the dealership charges. What else is there to say.

Edwin

17 years of experience
8 reviews
Edwin
17 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Oil Change - Cary, North Carolina
Edwin was awesome, not only was he knowledgeable about my car he is just an all around great guy and fun to chat with. I will definitely book Edwin again

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Brake Pads Replacement (Rear) - Cary, North Carolina
All good. Knowledgeable and friendly. Highly recommend!

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz Sprinter 3500 V6-3.0L Turbo Diesel - Car is not starting - Deer Park, Texas
Not complete

Excellent Rating

(5,600)

Rating Summary
5,210
189
54
28
119
5,210
189
54
28
119
Number of Mercedes-Benz services completed
61600+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Start a Car After Filling With the Wrong Fuel
Everybody Everybody makes mistakes, and putting the wrong type of gas (https://www.yourmechanic.com/article/how-to-know-what-type-of-gas-to-use-by-jason-unrau) in your car is one of those accidents that can cost a lot of money and become a huge inconvenience if not handled properly. If you put regular...
P0277 OBD-II Trouble Code: Cylinder 6 Injector Circuit High
P0277 P0277 code definition This code means that there is an injector circuit malfunction affecting cylinder six. What the P0277 code means When this code appears, the ECM (engine control module) has reported that either the resistance of voltage for...
The Guide To Colored Curb Zones in South Dakota
The The curb zone guide to South Dakota Residents who live and drive in South Dakota know that they need to pay attention when they are driving to keep safe and to be sure they are abiding by the laws...

Can't shift out of Park

The shift mechanism has a solenoid that is part of the mechanism, which may have broken the small lever that releases the lock that enables the shifter to get out of Park. The fix is to replace the shifter assembly....

My car has a mass air flow circuit range issue

Hello. P0101 (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson) is the trouble code for an issue with the MAF sensor circuit range. This code is set when the computer detects an issue with the vehicle's MAF sensor signal. If the MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) has been replaced,...

Rebuilt 350 engine rebuilt Quadrajet carburetor with new computer. Nothing will connect to the computer, which is effecting my transmission.

Hi there. Check the wiring to the carburetor and see if the choke is coming on or staying off. The computer controlled carburetors are designed to meter the choke and fuel jets. If the wiring to the carburetor has power...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com