Mercedes-Benz A250 Electronic Control Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,730)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,730)

Electronic Control Relay Replacement Service

How much does a Electronic Control Relay Replacement cost?

On average, the cost for a Mercedes-Benz A250 Electronic Control Relay Replacement is $141 with $46 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Mercedes-Benz A250L4-2.0L TurboService typeElectronic Control Relay ReplacementEstimate$207.35Shop/Dealer Price$240.44 - $317.21
Show example Mercedes-Benz A250 Electronic Control Relay Replacement prices

What is the Electronic Control Relay all about?

A wide range of electronic systems must work properly in order for the vehicle to operate. That means there is a need for several different controllers to ensure proper operation. One of the most important is the electronic control relay. You might be more familiar with the term “main relay” because of its role in vehicle performance.

The electronic control relay operates the fuel pump and sends power to the engine’s injectors. Without the main relay, fuel will not flow from the tank to the engine, and your injectors will not atomize gasoline into the combustion chamber. In short, your car wouldn’t run. Electronic control relays are subject to failure from a number of different problems, including outright failure, heat damage, cracked solder and more.

Keep in mind:

  • The electronic control relay may not operate, or may operate intermittently depending on the source of the trouble.
  • A number of other problems can masquerade as a main relay failure, so it’s vital that you have one of our expert mechanics diagnose the issue.

How it's done:

  • The electronic control relay is located and accessed then verified it needs replaced
  • The defective relay is removed from the vehicle
  • The new electronic relay is installed
  • The components that the electronic relay operates are checked for proper operation
  • The vehicle is road tested for proper operation

Our recommendation:

Traditional turnkey ignition the relay will click three times during the starting process. If you listen closely, you should hear a single click when you turn the ignition to “on”. You should hear another when the Check Engine light turns off. Finally, there should be a third click when you turn the key to the “start” position. If you do not hear a click at any of these three points, there may be a problem with the electronic control relay. Have one of our expert mechanics diagnose and replace the relay if required.

What common symptoms indicate you may need to replace the Electronic Control Relay?

  • Engine doesn’t start, especially in cold weather
  • Engine may not start a few minutes after turning it off
  • No sound from the fuel pump when the ignition key is turned to “On”

How important is this service?

Given the fact that the electronic control relay powers the fuel pump and your fuel injectors, it is essential to replace a faulty one. However, many other problems can present similar symptoms, so it’s very important to have the issue diagnosed by one of our expert mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Tony

14 years of experience
121 reviews
Tony
14 years of experience
Mercedes-Benz S500 V8-5.0L - Car is not starting - Oakland, California

Rusty

23 years of experience
528 reviews
Rusty
23 years of experience
Mercedes-Benz C300 V6-3.0L - Thermostat - Euless, Texas
Very nice to work with and knowledgeable

Jeremy

20 years of experience
642 reviews
Jeremy
20 years of experience
Mercedes-Benz SLK350 V6-3.5L - Crankshaft Position Sensor Replacement - Boynton Beach, Florida
Above expectation. And I don't know how your Company popped up on my phone, I wasn't looking for a mobile mechanic.

Jason

12 years of experience
13 reviews
Jason
12 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Pre-purchase Car Inspection - Sykesville, Maryland
Top shelf mechanic. Diligent, courteous, thorough and professional. Demonstrated a high degree of expertise with limited production AMG model variant. Would recommend Jason for any pre-purchase inspection or general mechanical work on any vehicle he indicated he can support.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Turn Signal Bulb
A A turn signal is one of those things on your vehicle that you don’t often pay much mind to, but it’s a very important safety feature. Without this turn signal, how would people know which way you are planning...
Illinois Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Illinois. Speed limits in Illinois 70 mph: rural interstates 65 mph: four-lane divided highways 55 mph: most other...
P0895 OBD-II Trouble Code: Shift Time Too Short
P0895 code means that there is an abnormality in the shift time between individual gears due to transmission blockage, failure, or dirty fluid.

Rough misfire at idle.

Generally, misfires are caused by either a spark or fuel issue or in cases, a combination of both. Spark related problems generally will result from things like ignition coils, crankshaft position sensor, spark plugs, spark plug wires or ignition modules...

Car jerks hard before stop and when accelerating from stop position. Only when the car is warmed up.

The source of the fault first has to be distinguished as "transmission versus engine". Of course, there can be issues in both components, too. If this is transmission related though, I see at least three Volkswagen technical service bulletins (TSB's)...

I recenlty changed the window regulator on my 2009 pontiac g5. After that, the car started to experience reduced engine power. Che

You cannot have a used ECM installed since it was programmed to old car. You will need to have a new or remanufactured one and have it programmed to work for your car and theft system. If the battery got...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com