Mercedes-Benz 560SEL Crankshaft Harmonic Balancer Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Crankshaft Harmonic Balancer Replacement Service

How much does a Crankshaft Harmonic Balancer Replacement cost?

On average, the cost for a Mercedes-Benz 560SEL Crankshaft Harmonic Balancer Replacement is $854 with $518 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercedes-Benz 560SELV8-5.6LService typeCrankshaft Harmonic Balancer ReplacementEstimate$1407.00Shop/Dealer Price$1680.87 - $2468.46
1990 Mercedes-Benz 560SELV8-5.6LService typeCrankshaft Harmonic Balancer ReplacementEstimate$1385.38Shop/Dealer Price$1651.83 - $2433.85
Show example Mercedes-Benz 560SEL Crankshaft Harmonic Balancer Replacement prices

What is the Crankshaft Harmonic Balancer all about?

The harmonic balancer (also called “crank pulley damper”), connected to the crankshaft of an engine, reduces engine vibration and serves as a pulley for the drive belts. The balancer or “damper” is composed of two elements: a mass and an energy-dissipating element. The mass resists the acceleration of the vibration and the energy dissipating (rubber) element absorbs the vibrations. When the balancer fails, it is usually due to heat, salt, and or ozone deterioration of the rubber. General wear, tear, and stress on the rubber is also a factor.

Keep in mind:

Usually a problem with the harmonic balancer means that it needs to be replaced. However, sometimes the rubber insert that sits between the center and the outside of the pulley is all that is damaged. It is also possible for the bolt that holds the balancer in place to become loose, which can cause problems even if the pulley isn’t damaged.

How it's done:

  • Inspect the harmonic balancer.
  • Remove drive belts and balancer.
  • Inspect condition of crankshaft front seal.
  • Replace the harmonic balancer.
  • Reinstall drive belts.
  • Start car and check for proper operation.

Our recommendation:

Harmonic balancers aren’t a part of most standard inspections, so keep your eye out for warning signs. If you notice excess vibration or noise from the engine, then your balancer may be damaged, and you need to schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Harmonic Balancer?

  • Vibration from engine.
  • Loud, abnormal engine noise, which increases with acceleration.

How important is this service?

The crankshaft harmonic balancer is connected to the crankshaft, and absorbs many of the vibrations that the engine creates. The engine creates a large amount of force that is delivered to the crankshaft, which transfers the power to the transmission. The harmonic balancer is responsible for absorbing some of the engine-created force so that the crankshaft doesn’t receive it all. When the harmonic balancer fails, the crankshaft receives all of the engine’s vibrations, and is susceptible to serious damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
3
1
1
0
0
3
1
1
0
0

Ruben

18 years of experience
169 reviews
Ruben
18 years of experience
Mercedes-Benz 560SEL V8-5.6L - Alternator - Charlotte, North Carolina
After the two disappointing missed appointments and lack of communication everything else was 100%

Scott

29 years of experience
7 reviews
Scott
29 years of experience
Mercedes-Benz 560SEL V8-5.6L - Car is not starting - Oklahoma City, Oklahoma
He was on time, very knowledgable

Jason

25 years of experience
57 reviews
Jason
25 years of experience
Mercedes-Benz 560SEL V8-5.6L - Spark Plug Replacement - Norman, Oklahoma
He was a blessing. Thank you for fixing my ride. He was nice and very helpful.i will call agin

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Mercedes-Benz 560SEL V8-5.6L - Battery is dead Inspection - Denver, Colorado
Nicholas arrives at the set time. He seemed to know his mechanics although he also diagnosed a leaky gasket cover. He strongly recommended IED getting

Excellent Rating

(5)

Rating Summary
3
1
1
0
0
3
1
1
0
0
Number of Mercedes-Benz 560SEL services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2555 OBD-II Trouble Code: Throttle/Fuel Inhibit Circuit High
P2555 means there is a problem with the FICM (fuel injection control module). The FICM regulates how much fuel is delivered by the fuel injectors.
P0032 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 1)
P0032 trouble code definition P0032 is the code for HO2S Heater Control Circuit High (Bank 1 Sensor 1) What the P0032 code...
P0666 OBD-II Trouble Code: PCM/ECM/TCM Internal Temperature Sensor Circuit
P0666 means that a circuit failure has caused a potentially catastrophic overheating condition in a sensor due to defective or shorted control module.

Hard to steer while parked

You could have several issues going on. Low power steering fluid, a bad power steering pump, or internally leaking rack and pinion can cause this issue. Consult your manual and check the fluid level in the power steering system. If...

my battery wont charge and its good and altenator is to whats wrong

If the battery will not hold a charge (https://www.yourmechanic.com/services/battery-will-not-hold-a-charge-inspection), then it may be bad or has a draw on it causing the drain. I recommend having the battery checked to see if the battery has a draw. Check to make...

Oil in coolant or rusty coolant?

Hi there. Typically when you see a copper like color in the coolant, it's a sign of rust coming from the inner radiator. Having a professional mobile mechanic complete a good radiator flush (https://www.yourmechanic.com/services/cooling-system-flush) should clean the system, however, if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com