Lexus RX350 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(426)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(426)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lexus RX350 Control Arm Assembly Replacement is $244 with $76 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Lexus RX350V6-3.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$773.70Shop/Dealer Price$905.47 - $1273.85
2017 Lexus RX350V6-3.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1984.85Shop/Dealer Price$2113.63 - $2456.23
2014 Lexus RX350V6-3.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1984.85Shop/Dealer Price$2128.68 - $2482.57
2016 Lexus RX350V6-3.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1984.85Shop/Dealer Price$2128.65 - $2482.52
2018 Lexus RX350V6-3.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$612.55Shop/Dealer Price$725.89 - $1056.90
2010 Lexus RX350V6-3.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$810.24Shop/Dealer Price$950.10 - $1354.73
2008 Lexus RX350V6-3.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$462.94Shop/Dealer Price$515.56 - $659.40
2012 Lexus RX350V6-3.5LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$521.92Shop/Dealer Price$589.23 - $777.27
Show example Lexus RX350 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(426)

Rating Summary
401
10
6
2
7
401
10
6
2
7

Juan

10 years of experience
47 reviews
Juan
10 years of experience
RX350 2007 - Serpentine/Drive Belt - Benicia, CA
No muss, no fuss. Just great work.

Tyrec

12 years of experience
10 reviews
Tyrec
12 years of experience
RX350 2010 - Pre-purchase Car Inspection - Cumberland, RI
Ty was very professional, caring, and comprehensive in his pre-purchase inspection of an Lexus RX350. Thank you!

Pierre

7 years of experience
223 reviews
Pierre
7 years of experience
RX350 2008 - Windshield Wiper Blade - Boston, MA
Very professional and knowledgeable

Raymond

35 years of experience
252 reviews
Raymond
35 years of experience
RX350 2015 - Axle / CV Shaft Assembly - Las Vegas, NV
Raymond was on time and efficient!

Excellent Rating

(426)

Rating Summary
401
10
6
2
7
401
10
6
2
7
Number of Lexus RX350 services completed
4686+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

P0762 OBD-II Trouble Code: Shift Solenoid C Stuck On
P0762 code means the car’s computer has detected an unusual operation within shift solenoid C often due too low/dirty fluids or poor wire connections.
P2120 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D Circuit
P2120 P2120 trouble code definition Throttle/Pedal Position Sensor/Switch D Circuit What the P2120 code means P2120 is an OBD-II generic code for the engine control module (ECM) detecting a major failure in the throttle pedal position sensor circuit of a...
10 Cars With Great Residual Value
One One thing many people in the market for a new car don’t think about when making a final purchase is the vehicle’s estimated residual value. Residual value is how much a car will likely be worth (https://www.yourmechanic.com/article/the-best-used-cars-to-buy-to-maximize-resale-value) once its...

P0483, with engine overheating.

Hello. P0483 is the trouble code a "Cooling Fan Rationality Check Malfunction. If the computer detects a discrepancy between the cooling fan's commanded state of operation, versus the actual state of the circuit, it will set off this code to...

Jeep starts but won't move

Hi Connor. Thanks for contacting us today. In most cases when this occurs, it's due to a shift linkage or shift solenoid failure. It's also possible that you have damage to seals or gaskets inside the transmission case. The best...

A warning light came on an says check powertrain

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com