Jeep Wrangler Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Jeep Wrangler Front Crankshaft Seal Replacement is $157 with $17 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Jeep WranglerL6-4.0LService typeFront Crankshaft Seal ReplacementEstimate$352.16Shop/Dealer Price$376.93 - $436.66
2015 Jeep WranglerV6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$363.93Shop/Dealer Price$420.25 - $585.08
2010 Jeep WranglerV6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$385.99Shop/Dealer Price$447.85 - $629.24
2005 Jeep WranglerL4-2.4LService typeFront Crankshaft Seal ReplacementEstimate$1030.32Shop/Dealer Price$1225.55 - $1803.71
2006 Jeep WranglerL6-4.0LService typeFront Crankshaft Seal ReplacementEstimate$339.88Shop/Dealer Price$365.15 - $427.48
1997 Jeep WranglerL6-4.0LService typeFront Crankshaft Seal ReplacementEstimate$347.20Shop/Dealer Price$371.90 - $437.92
1997 Jeep WranglerL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$323.74Shop/Dealer Price$342.35 - $390.60
1992 Jeep WranglerL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$206.95Shop/Dealer Price$224.05 - $271.16
Show example Jeep Wrangler Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Jeep Wrangler Front Crankshaft Seal Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P0786 OBD-II Trouble Code: Shift/Timing Solenoid Range/Performance
P0786 means there is a problem with the shift/timing solenoid due to a low fluid levels, faulty solenoid, or internal transmission components.
Symptoms of a Bad or Failing Windshield Washer Reservoir
Common signs include fluid leaks from below the car, washer fluid not spraying or frequently low, and cracks in the tank.
Windshield Laws in Maryland
Licensed Licensed drivers know they are required to follow the traffic laws when traveling the roads in Maryland. In addition to the rules of the road that all motorists must follow, there are also specific regulations concerning the windshield of...

Tire pressure system malfunctioning.

The tire pressure monitoring system may need to be placed in a relearn mode in order to relearn the tire pressure from each of the tires. As the relearn procedure is being completed the car signals as it reads from...

Convertible top stuck partially open

There is a technical service bulletin from Volkswagen for updated programming to remedy inconsistent operation of the convertible top; you may want to take your Eos to a dealer to get the update. Also, disconnecting the battery for 15 minutes,...

Electrical problem in Nissan pathfinder 01, burning out my spark plugs and temp censor in the last two months.

The only way you can burn out spark plugs in a month is to have your engine running so lean it will have misfires, low power and other driveability problems. I suggest having fuel system pressure tested and computer tested...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com