Jeep J-2600 Car does not move when I step on the gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Car does not move when I step on the gas pedal Inspection Service

How much does a Car does not move when I step on the gas pedal Inspection cost?

On average, the cost for a Jeep J-2600 Car does not move when I step on the gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1971 Jeep J-2600L6-3.8LService typeCar does not move when I step on the gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1968 Jeep J-2600L6-3.8LService typeCar does not move when I step on the gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1971 Jeep J-2600V8-5.0LService typeCar does not move when I step on the gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1972 Jeep J-2600V8-5.9LService typeCar does not move when I step on the gas pedal InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1968 Jeep J-2600V8-5.3LService typeCar does not move when I step on the gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1969 Jeep J-2600V8-5.7LService typeCar does not move when I step on the gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1971 Jeep J-2600V8-5.9LService typeCar does not move when I step on the gas pedal InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1965 Jeep J-2600L6-3.8LService typeCar does not move when I step on the gas pedal InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep J-2600 Car does not move when I step on the gas pedal Inspection prices

There are many reasons why a car will not move when you step on the gas pedal and they vary from easily corrected to requiring a laborious repair. A lack of power often involves the fuel system in one way or another. It could be something as simple as an engaged emergency brake or as complicated as internal engine malfunctions.

A car that runs rough, is sluggish, or frequently stalls is dangerous. The first thing to do is ensure the emergency brake is disengaged. If the emergency brake has been eliminated as the problem, a mechanic is needed to diagnose the acceleration problem.

Common reasons for this to happen:

Acceleration issues typically stem from one of the following conditions:

  • Emergency break is on or stuck: This is actually one of the most common reasons that a car will not move or seems to be experiencing poor acceleration. The brake may be on simply because the driver forgot to disengage it, or it may be stuck.

An emergency brake can become stuck if it is left on for a long period of time or if it was applied with more force than usual. In regions that use salt for de-icing, or when the emergency brake has gone without use for a long period of time, releasing the brake may require the assistance of a professional mechanic.

  • Engine management issues: Many sensors interact with the engine control module to add the correct amount of fuel based on the amount of air that is coming into the engine.

As the engine management system wears, you may notice poor idle quality, stalling, and poor fuel economy. A car may run for months with a malfunctioning sensor, but eventually the problem may progress to a stalling condition or a serious lack of power.

A Check Engine light will normally be observed as well.

  • Low fuel pressure: A fuel pump moves fuel from the fuel tank, through the fuel filter, and to the engine to be burned in the engine cylinders. If the fuel pump or filter begins to fail, lower than specified fuel pressure may cause various symptoms.

Symptoms of a failing fuel pump or clogged fuel filter may include sputtering, hesitation during acceleration, power loss when the car is under load, and finally an engine that will not start. Proper maintenance, including replacing the fuel filter as scheduled, will help prolong the service life of the fuel pump and maintain proper fuel pressure.

  • Gross intake manifold leak: While this is not a common occurrence, a manifold leak does happen. This will cause the manifold to draw additional air via the leak, putting too much air into the cylinders and decreasing the amount of gasoline that is delivered in relation to air.

The engine will run rough and sluggish under such conditions. As the situation gets worse, it may eventually cause the car to stall. A hissing sound or Check Engine light may be observed as well.

  • Malfunctioning electronic throttle control: Most late-model vehicles utilize an electronically controlled throttle to control airflow into the engine. This system relies on multiple electronic inputs, computers, and motors to control engine speed. If the system detects a malfunction, the computer will usually shut down the throttle opening as a precaution. In this case, multiple error codes will be logged, a Check Engine light may be displayed, and the vehicle may not exceed 35 to 40 mph.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the acceleration issues, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

Any problem that causes hesitation or stalling in a car can present a hazard. The earlier these issues are addressed, the more likely it is the problem will remain localized, and therefore less expensive to repair. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Tabitha

17 years of experience
332 reviews
Tabitha
17 years of experience
Jeep Grand Cherokee L6-4.0L - Car does not move when I step on the gas pedal - Bonita, California
Tabitha is great! Extremely knowledgeable, friendly and very helpful. i will always request her to do work on my cars. i have complete confidence in her to get the job done, no matter what is needed.

Gustavo

17 years of experience
426 reviews
Gustavo
17 years of experience
Jeep Wrangler V6-3.6L - Car does not move when I step on the gas pedal - Converse, Texas
The men knows his stuff! Glad to get someone with Jeep experience. He figured out the real problem and got my girl on the road again! Will definitely request him again.

Jeffrey

16 years of experience
102 reviews
Jeffrey
16 years of experience
Jeep Wrangler V6-3.6L - Car does not move when I step on the gas pedal - Tampa, Florida
Fast professional service, good honest communication.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Jeep Patriot L4-2.4L - Car does not move when I step on the gas pedal - Chicago, Illinois
Knowledgeable, polite and professional, prompt and helpful. I appreciate Rigo coming out to service my car!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Jeep Car does not move when I step on the gas pedal Inspection services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Child Seat Safety Laws in Arizona
In In Arizona, motorists and their passengers are required to wear seat belts regardless of whether they are in the front or back seat. This is a law that is founded in basic common sense – seat belts save lives....
P0732 OBD-II Trouble Code: Gear 2 Incorrect Ratio
P0732 code identifies an issue with the vehicles automatic transmission often due too low transmission fluid or broken/faulty PCM.
P2544 OBD-II Trouble Code: Torque Management Request Input Signal A
P2544 code means an input signal malfunction has been detected in a powertrain-related control module due to problems with electrical input signals

How do you operate the interior access to the trunk from the back seat?

If your car is outfitted with a folding rear seat, then you also have convenient access to the trunk through a folding seat back. Here’s how to use it: Locate the plastic cover above the center seat and open it....

I need my [brakes](/topics-brake-nissan/) replaced will that make the traction control light come on

Good afternoon,

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com