Hyundai Sonata Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,041)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,041)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Hyundai Sonata Power Steering Pump Replacement is $349 with $209 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Hyundai SonataL4-2.0LService typePower Steering Pump ReplacementEstimate$1651.44Shop/Dealer Price$2015.09 - $3094.70
1998 Hyundai SonataV6-3.0LService typePower Steering Pump ReplacementEstimate$1580.43Shop/Dealer Price$1940.87 - $3018.08
2012 Hyundai SonataL4-2.4LService typePower Steering Pump ReplacementEstimate$896.53Shop/Dealer Price$1086.02 - $1650.32
2003 Hyundai SonataV6-2.7LService typePower Steering Pump ReplacementEstimate$611.67Shop/Dealer Price$729.95 - $1080.60
1990 Hyundai SonataL4-2.4LService typePower Steering Pump ReplacementEstimate$1580.43Shop/Dealer Price$1942.37 - $3020.70
1992 Hyundai SonataV6-3.0LService typePower Steering Pump ReplacementEstimate$1580.43Shop/Dealer Price$1941.04 - $3018.37
2000 Hyundai SonataL4-2.4LService typePower Steering Pump ReplacementEstimate$563.47Shop/Dealer Price$669.71 - $984.23
2017 Hyundai SonataL4-2.4LService typePower Steering Pump ReplacementEstimate$896.53Shop/Dealer Price$1086.02 - $1650.32
Show example Hyundai Sonata Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(2,041)

Rating Summary
1,917
70
15
6
33
1,917
70
15
6
33

Alec

8 years of experience
13 reviews
Alec
8 years of experience
Sonata 2010 - Brake Rotor/Disc - Phoenix, AZ
Alec was able to come earlier than my original appointment which worked out great for me. He was quick, kind, knowledgeable, and thoroughly explained issues my car may have in the future and parts that will need to be replaced, including a time frame for everything.

Ben

10 years of experience
1 reviews
Ben
10 years of experience
Sonata 2017 - Oil Change - Vacaville, CA
Ben is awesome and took his time to cover everything. Will book again

Jordan

7 years of experience
16 reviews
Jordan
7 years of experience
Sonata 2013 - Oil Change - Kissimmee, FL
10/10

Derrick

20 years of experience
16 reviews
Derrick
20 years of experience
Sonata 2013 - Oil Change - Brooklyn, NY
on-time is key ,as well as communication and prompt service. Thank you for your time.

Excellent Rating

(2,041)

Rating Summary
1,917
70
15
6
33
1,917
70
15
6
33
Number of Hyundai Sonata services completed
22451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Florida
There There are a number of things that a Florida resident will have to do in order to ensure they stay in compliance with all of the laws in their state. If you drive a car on the roadways in...
How to Prepare for the Wisconsin Driver’s Written Test
If If you are looking forward to getting your license in Wisconsin, you first need to take your written driver’s exam so you can get your learner’s permit and then take the road test. The written exam, as long as...
P0886 OBD-II Trouble Code: Traction Control Module (TCM) Power Relay Control Circuit Low
P0886 means the communication circuit in the TCM is not working properly, most likely due to a malfunctioning ON/OFF switch.

Parking sensor causing false beeps

Is the sensor totally pushed in and hanging by the wires or pushed in a little? Either way you have to determine which parts are damaged: the sensor itself, the bezel for it or the bumper. The sensor and bezel...

Leak detection pump location?

Hi there. You are probably going to spend more time, effort and trouble trying to replace this component on your BMW than it would be worth - especially if you're planning on trading the vehicle in to a new purchase....

I talked to one a few days ago, I have a 2009 mercury mariner 6 cylinder

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com