Hyundai Accent Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(629)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(629)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Hyundai Accent Front Crankshaft Seal Replacement is $356 with $20 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Hyundai AccentL4-1.5LService typeFront Crankshaft Seal ReplacementEstimate$1399.72Shop/Dealer Price$1587.96 - $2115.42
2012 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$832.99Shop/Dealer Price$854.05 - $894.95
2014 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$828.93Shop/Dealer Price$849.11 - $887.08
2009 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1388.63Shop/Dealer Price$1576.45 - $2120.67
2011 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1388.63Shop/Dealer Price$1583.23 - $2132.53
2006 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1388.63Shop/Dealer Price$1577.10 - $2121.80
2007 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1388.63Shop/Dealer Price$1576.52 - $2120.80
2004 Hyundai AccentL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1388.63Shop/Dealer Price$1576.45 - $2120.67
Show example Hyundai Accent Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(629)

Rating Summary
604
15
1
3
6
604
15
1
3
6

Larry

15 years of experience
23 reviews
Larry
15 years of experience
Accent 2007 - Exterior Door Handle - Columbus, OH
Larry was friendly and did a great job replacing my door handle. Thanks Larry!

Daniel

8 years of experience
37 reviews
Daniel
8 years of experience
Accent 2019 - Battery - Henderson, NV
Daniel was excellent! He arrived exactly when he said he would with the correct battery for my car. He went to work immediately and completed the job in no time at all. I would not hesitate to have him back again to service my car. Thank you Daniel! I would also like to thank Jason at your mechanic for taking my call and being so knowledgeable and pleasant

Luis

13 years of experience
142 reviews
Luis
13 years of experience
Accent 2019 - Check Engine Light is on - Las Vegas, NV
Awesome, quick job!

James

21 years of experience
49 reviews
James
21 years of experience
Accent 2008 - Car is not starting - Lithia Springs, GA
Excellent service. Super knowledgeable and helpful.

Excellent Rating

(629)

Rating Summary
604
15
1
3
6
604
15
1
3
6
Number of Hyundai Accent services completed
6919+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Variable Valve Timing (VVT) Switch Last?
Having Having a smooth running car is no accident. A lot of different parts have to work in conjunction with each other for the engine to run smoothly. The variable valve timing (VVT) system has a lot to do with...
P2403 OBD-II Trouble Code: EVAP Leak Detection Pump Sense Circuit/Open
Diagnostic Diagnostic Trouble Code (DTC): P2403 P2403 code definition EVAP Leak Detection Pump Sense Circuit/Open Related Trouble Codes: P2404: EVAP Leak Detection Pump Sensor Circuit Range/Perf P2405: EVAP Leak Detection Pump Sensor Circuit Low P2406: EVAP Leak Detection Pump Sensor...
Maintenance Minder and Service Codes For Acura Cars
Acura scheduled maintenance is tracked by the Acura Maintenance Minder system. Main codes A and B combine with sub codes for exact service, like A1.

Gas smell coming from vehicle

Hello. Anytime you smell gas coming from your vehicle, it is a serious issue. Gas fumes are highly flammable and can easily catch fire. Gas fumes may also make you feel dizzy or light headed. Both can make operating a...

My car vibrates between 50-60 mph

A vibration while driving is generally caused by something that rotates with vehicle speed. A number of components can be the cause. An out of balance tire or tires, as well as an out of round tire (shifted belt) or...

I have a 2008 f250 with a 6.4 diesel. I have the updated hoses on it. I moved the top hose at the radiator and I heard pressure re

Your best indication of the efficiency, and condition, of the cooling system is the engine operating temperature. If the operating temperature is in the "normal" range for your engine, then you need not worry. As far as the generation of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com