GMC Yukon XL Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a GMC Yukon XL Water Pump Replacement is $474 with $236 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$735.70Shop/Dealer Price$859.87 - $1218.61
2018 GMC Yukon XLV8-6.2LService typeWater Pump ReplacementEstimate$910.17Shop/Dealer Price$1033.72 - $1392.00
2020 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$960.36Shop/Dealer Price$1138.10 - $1663.80
2018 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$910.17Shop/Dealer Price$1033.79 - $1392.12
2015 GMC Yukon XLV8-6.2LService typeWater Pump ReplacementEstimate$720.38Shop/Dealer Price$844.10 - $1202.49
2016 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$720.38Shop/Dealer Price$841.83 - $1198.53
2019 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$960.36Shop/Dealer Price$1138.13 - $1663.84
2017 GMC Yukon XLV8-5.3LService typeWater Pump ReplacementEstimate$720.38Shop/Dealer Price$841.59 - $1198.11
Show example GMC Yukon XL Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1

AUDIE

34 years of experience
191 reviews
AUDIE
34 years of experience
GMC Yukon XL V8-5.3L - Pre-purchase Car Inspection - Las Vegas, Nevada
Great experience

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
GMC Yukon XL V8-6.2L - Strut Assembly Replacement (Front, Rear) - Kansas City, Missouri
Just as expected, smooth and easy.

Rohon

49 years of experience
147 reviews
Rohon
49 years of experience
GMC Yukon XL V8-6.2L - Pre-purchase Car Inspection - Fort Pierce, Florida
Thank you so much Rohon for the prompt, reliable, excellent service. Much appreciated!

Nickolas

7 years of experience
54 reviews
Nickolas
7 years of experience
GMC Yukon XL V8-6.2L - Battery - Shawnee Mission, Kansas
Nick was super polite, prompt and fixed my car ASAP! I would definitely recommend him.

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1
Number of GMC Yukon XL services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Cadillac Escalade ESV
When When most people think of the Cadillac Escalade, two words generally come to mind: power and luxury. The 2012 Cadillac Escalade ESV is no different. However, with this model, you can throw in another word: efficient. This hybrid carries...
P0674 OBD-II Trouble Code: Cylinder 4 Glow Plug Circuit
P0674 code means when the voltage from the glow plug circuit has a variance of 10 % over manufacturer specs due to a faulty plug, relay, or wiring.
How Long Does a Parking Brake Release Cable Last?
Your Your car’s parking brake is engaged and disengaged separately from your primary braking system. A steel cable runs from the lever or parking brake cable to the back to activate the brake, and a release cable triggers the mechanism...

Stuck hood on truck.

The first thing I would try is to have someone pull on the hood release while you pull up on the hood. If that doesn't work sometimes a firm bump on the hood while the release is being pulled will...

Battery light was on and now car won't start and keys stuck in ignition

Hi there. It more than likely that you are experiencing an issue with the alternator or the main relay as opposed to the battery itself. Once your car starts, power to all components and accessories is provided by the alternator;...

Mega fuse snapped off when trying to loosen bolts. Do we need to replace the whole battery fuse box or just the broken fuse?

The mega fuse unbolts and is replaceable separately. If the common plate was bent it can potentially be straightened but if any of the segments of the plate that bolt to to the fuses are broken, you can obtain a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com