GMC S15 Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a GMC S15 Exhaust Gas Recirculation/EGR Valve Replacement is $198 with $58 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC S15V6-2.8LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$332.58Shop/Dealer Price$380.58 - $516.46
1990 GMC S15V6-4.3LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$280.65Shop/Dealer Price$316.15 - $418.52
1990 GMC S15L4-2.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$358.45Shop/Dealer Price$413.42 - $574.16
Show example GMC S15 Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-4.3L - Tune-up - Fresno, California
Explained everything easily. Didn't seem to be in a rush, and got my vehicle in order. Thank you, Thank you, Thank you!

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-2.8L - Air Shocks Replacement (Rear) - Clovis, California
Very good and efficient.

Colby

15 years of experience
66 reviews
Colby
15 years of experience
GMC S15 V6-2.8L - Car is overheating - Denver, Colorado
Colby was early and got right to work. Finished quickly and patiently explained issues and solutions.

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
GMC S15 V6-2.8L - Valve Cover Gasket - Tacoma, Washington
He's great!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of GMC S15 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0806 OBD-II Trouble Code: Clutch Position Sensor Circuit Range/Performance Malfunction
P0806 code means there is an issue with the clutch position sensor (manual) or a problem with the PCM in an automatic, often due too damaged wiring.
How to Replace the Parking Brake Cable
A parking brake cable links the control to the brake's mechanical assembly. A working parking brake is needed to keep a car stationary on inclines.
Symptoms of a Bad or Failing Ignition Cable
Common signs include a decrease in power, acceleration, and fuel efficiency, the Check Engine Light coming on, and visible damage to the cables.

210 gas mileage on a Nissan Maxima with a full tank of gas

Yes, change the fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement) anyway. It's so old so you might as well. But that gas mileage is pretty much normal for Maximas. Those have V6 engines that are very powerful. Most people drive them reasonably fast. The...

Car is not firing on the first two cylinders

This is generally related to spark problems when it is more consistent. Spark related problems generally will result from things like ignition coils, crankshaft position sensor, spark plugs, spark plug wires or ignition modules not working properly. As you know,...

Code po351.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com