Dodge Wm300 Power Wagon Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Dodge Wm300 Power Wagon Brake Drum Replacement is $453 with $225 for parts and $228 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Dodge Wm300 Power WagonL6-4.1LService typeBrake Drum ReplacementEstimate$726.44Shop/Dealer Price$863.05 - $1218.90
1963 Dodge Wm300 Power WagonL6-4.1LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.10 - $1170.98
1960 Dodge Wm300 Power WagonV8-5.2LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.09 - $1170.97
1962 Dodge Wm300 Power WagonV8-5.2LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.04 - $1170.88
1961 Dodge Wm300 Power WagonL6-4.1LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.13 - $1171.04
1966 Dodge Wm300 Power WagonL6-4.1LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.09 - $1170.97
1960 Dodge Wm300 Power WagonL6-3.8LService typeBrake Drum ReplacementEstimate$690.44Shop/Dealer Price$826.77 - $1182.40
1961 Dodge Wm300 Power WagonV8-5.2LService typeBrake Drum ReplacementEstimate$690.44Shop/Dealer Price$827.66 - $1183.96
Show example Dodge Wm300 Power Wagon Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Scott

36 years of experience
902 reviews
Scott
36 years of experience
Dodge Caliber L4-2.0L - Brake Drum - Gilbert, Arizona
Great overall experience!

TJ

26 years of experience
362 reviews
TJ
26 years of experience
Dodge Caliber L4-2.0L - Brake Drum - Denver, Colorado
Excellent service and he's was such an up beat guy.

Kyle

20 years of experience
20 reviews
Kyle
20 years of experience
Dodge Caliber L4-2.0L - Brake Drum - Lake Villa, Illinois

Christopher

27 years of experience
348 reviews
Christopher
27 years of experience
Dodge Neon L4-2.0L - Brake Drum - Valrico, Florida
Excellent appointment. Christopher was super knowledgeable, friendly and courteous. Went above and beyond my expectations. No more repair shop fear for me! Now that feels awesome! Already booked him again and plan to do so in the future as needed. Totally recommend him as your go to car guru for all of your car needs! Thank you Christopher!

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Dodge Brake Drum Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Leaking Gas Tank?
A leaking gas tank can be caused by a number of different things, such as rocks or sharp objects your car picks up...
What are the Car Pool Rules in Missouri?
Car Car pool lanes have existed for decades, and are becoming more and more common. There are more than 3,000 miles of car pool lanes across the nation, which helps the commute of thousands of drivers every single day. A...
All About Full Coverage Car Insurance
Car insurance keeps car owners protected. Full coverage car insurance includes state-mandated coverage, plus collision and comprehensive coverage.

Brake lights and third brake lights not working

When you turn on the head lights you are seeing the parking lights come on. Check to make sure your brake light fuse (https://www.yourmechanic.com/services/fuse-replacement) is good. If it's good, check for power going in and out of brake light when...

How can I tell if my radiator uses a bevel washer or a nut?

Hi and thanks for contacting YourMechanic. When it comes to replacing the radiator in your vehicle, it is best to replace the radiator with the OEM type. If there are two types of radiators that go into your vehicle, you...

low oil service sign, I checked it, it had none. So I put 3 quarts, some came out and started smoking can I drive it for 2 miles

This is a case where you may be better off calling the tow truck. It will cost a bit, but if there is something seriously wrong you may make a complete wreck of your engine by driving. When the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com