Best Prices for Brakes, Steering and Suspension Inspection

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,886)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,886)


Brakes, Steering and Suspension Inspection Service

The brakes, suspension, and steering systems are all major safety components of any vehicle. If something is going wrong with one of them it can seriously affect the performance and the safety of the car.

There can be simple issues such as worn brake pads, the wheels being out of alignment or leaking steering fluid to the more severe issues like a warped rotor, bad tie rods or failing struts.

Regardless of the issues, getting the brakes, suspension and steering systems inspected and repaired is key to making the car safe to drive.

How this system works:

Brakes

Brakes are available as disc or drums, older vehicles tend to have drum brakes while new models incorporate disc brakes. Both systems use friction and resistance to bring the vehicle to a stop.

Disc brakes have a rotor that is connected to the wheel. Brake pads grind against the rotor, creating friction, which brings the car to a stop. Over time, brake pads and rotors will wear down and have to be replaced.

Drum brakes work on the same principal. A drum is attached to the wheel and when the brake pedal is depressed, brake shoes press against the drum, slowing the vehicle. Brake shoes, like pads will wear out over time.

Suspension

The job of the suspension system is to maximize the friction between the tires and the road, as well as provide stability to the steering system. There are a number of different suspension systems. The main components of the suspension system are struts, shock absorbers, springs and tires.

The springs help to support the weight of the vehicle, they also maintain ride height, and absorb bumps in the road.

The shocks reduce the up and down motion of the car that is produced when the vehicle hits bumps on the road or highway.

Struts replace the shocks and springs on some vehicles. They combine the shock and spring into a single unit.

Tires keep the vehicle in contact with the road and provide traction to make driving safe.

Steering System

The steering system takes the rotation of the steering wheel and converts into the swiveling motion of the wheels.

A rack and pinion system uses a gear set that is enclosed in a metal tube. Both ends of the rack protrude from the end of the tube. A tie rod connects to each end of the rack and the pinion gear is attached to a steering shaft. As the steering wheel is turned, the gear spins which moves the rack.

Common reasons for this to happen:

Brakes

  • Loss of Hydraulic Pressure: The brake system uses hydraulic pressure to push the brake pads against the rotors. If there is a leak in the hydraulic system the brakes will not provide the correct stopping power.

  • Worn Brake Pads: Brake: Brake pads will wear out over time. The have a indictor that will make contact with the rotor and produce a squealing noise when they get too thin. If the brakes are squealing the pads should be replaced. If the squealing turns into a grinding noise, the pads have worn through completely, this can damage the rotors which is a much more expensive repair.

  • Stuck Caliper: The calipers push the brake pads against the rotors. If a caliper gets stuck the vehicle will pull to one side. A failing brake hose can cause this issue.

  • Warped Rotors: If the rotors are exposed to stress, such as towing or mountain driving, they can warp. Warped rotors will cause the vehicle to vibrate and shake while braking.

  • Worn Brake Shoes: This is basically the drum brake version of worn brake pads for disc brakes. The shoes will squeal when they are too thin and need to be replaced. A grinding noise indicates shoes that have been worn through completely.

Suspension

  • Worn Shocks or Struts: In most vehicles the struts will eventually wear out and need to be replaced. If you notice excessive bouncing when going over bumps, or the vehicle nosedives when braking, it may be time to replace the shocks or struts.

  • Uneven Tire Wear: A failing suspension system can lead to uneven tire wear as the system is not holding the wheels even on the road at the proper angle. Look for bald spots on your tires. Suspension problems should be inspected and repaired as soon as possible.

  • Bad Spring Coils: In most cases, spring coils will last the life of the car but they can break. If the vehicle is not driving smoothly or leaning heavily to one side, it could be an issue with the spring coils. This should be fixed immediately.

  • Leaking Shocks: Shocks will often have to be replaced over the life of a car. If there is oil leaking on the garage floor or a leak is visible from the shocks, it is time to get them replaced.

Steering

  • Bad Tie Rods: Tie rods are the component that connects the steering linkage to the wheels of a vehicle. Eventually tie rods will wear out. As they do the vehicle will go out of alignment and wear the tires faster. There may also be a squeaky sound and the steering wheel may be harder to turn.

  • Loose Lug Nuts: Something as simple as a loose lug nut will cause the steering wheel to shake. This is a fairly easy problem to fix.

  • Unbalanced Wheels: This problem can also cause the steering wheel to shake at certain speeds. At higher speeds this can become dangerous. The tires should balanced as soon as possible.

  • Steering Gearbox Not Responding or Hard to Steer: if the steering wheel does not seem to be responding properly or it is hard to steer this can indicate a problem with the steering gearbox. This issue can quickly become dangerous. The steering system should be inspected and repaired as soon as possible.

  • Power Steering Malfunction: The power steering component can malfunction for a number of reasons. Fluid may be leaking due to damaged seals on the power steering pump, or there could be a leak in one of the power steering hoses. A whirring or siren-like sound coming from the steering pump can be an indicator of this problem.

  • Power Steering Pump: A failing power steering pump can make the steering wheel hard to turn and it may make a groaning noise when the wheel is turned. A failing pump will eventually die and need to be replaced.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the brake, suspension or steering issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All three of these systems are vital to the safety of the vehicle. While some issues with these systems will be more of an inconvenience than a safety issue, other problems can lead to dangerous driving conditions and the problem should be addressed as soon as possible.


Recent Brakes, Steering and Suspension Inspection reviews

Excellent Rating

(1,886)

Rating Summary
1,742
57
15
10
62
1,742
57
15
10
62

Jermarcus

13 years of experience
70 reviews
Jermarcus
13 years of experience
Mazda CX-9 V6-3.7L - Brakes, Steering and Suspension Inspection - Fayetteville, Georgia
Jermarcus was professional, showed up on time and completely did a great job servicing our vehicle. Very Knowledgeable and considerate. Did the job right the first time.

Ira

49 years of experience
283 reviews
Ira
49 years of experience
Subaru Outback H4-2.5L - Brakes, Steering and Suspension Inspection - Brandon, Florida
Ira was efficiect, thorough and explict in the corrective process. There was no mechincal fix to the problem. However, Ira walked me through the corrective procedure in case of a reoccurrence of the problem.

Christopher

16 years of experience
246 reviews
Christopher
16 years of experience
Kia Soul L4-2.0L - Brakes, Steering and Suspension Inspection - Charlotte, North Carolina
He was ahead of schedule, all organized, ready to complete the work. I had unfortunately ordered the wrong parts.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Volkswagen Routan V6-3.8L - Brakes, Steering and Suspension Inspection - Fremont, California
Pardeep is professional, knowledge, and responsible. I will definitely recommend him to whoever need auto service.

Recent articles & questions

Symptoms of a Bad or Failing Heater Bypass Tube
If you see coolant leaking under your car or smell coolant from your car, you may need to replace the heater bypass tube.
P0479 OBD-II Trouble Code: Exhaust Pressure Control Valve Intermittent
P0479 code means there is an out-of-the-ordinary voltage reading from the exhaust pressure control valve circuit often due to damaged wiring.
P0917 OBD-II Trouble Code: Gear Shift Position Circuit High
P0917 means there is an electrical malfunction with the gear shift position circuit, likely caused by damaged electrical components or broken wires.

Car takes 2-3 tries before starting

You will need to have a mechanic diagnose both the codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) to see if you have a problem with both sensors or have a problem with the timing of the engine being out of position. The codes suggest that...

P2178 and P115D codes are showing up on a scanner. Could both be related to the MAF sensor?

Hi there. The code P115D (http://www.obd-data.com/p115d.html) is for the mass air flow sensor (MAF (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement)). It says that the sensor has an offset signal. The code P2178 (https://www.yourmechanic.com/article/p2178-obd-ii-trouble-code-system-too-rich-off-idle-bank-1-by-jay-safford) says that bank 1 is too rich. This means that the engine...

What is the torque required for a inner tie rod?

Hi there. The inner part of the tie rod (differential-to-drive axle flange nut) is torqued between 40 to 47 foot pounds. The outer part of the tie rod (tie rod end nut) is torqued between 31 to 42 foot pounds....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (855) 347-2779 · hi@yourmechanic.com