Dodge W100 Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Dodge W100 Brake Drum Replacement is $431 with $203 for parts and $228 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1976 Dodge W100V8-5.9LService typeBrake Drum ReplacementEstimate$931.88Shop/Dealer Price$1119.85 - $1629.78
1985 Dodge W100V8-5.9LService typeBrake Drum ReplacementEstimate$919.69Shop/Dealer Price$1083.72 - $1467.59
1985 Dodge W100V8-5.2LService typeBrake Drum ReplacementEstimate$919.69Shop/Dealer Price$1083.71 - $1467.58
1975 Dodge W100V8-5.2LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.04 - $1170.88
1976 Dodge W100V8-6.6LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.13 - $1171.04
1975 Dodge W100V8-7.2LService typeBrake Drum ReplacementEstimate$678.44Shop/Dealer Price$815.09 - $1170.97
1989 Dodge W100V8-5.2LService typeBrake Drum ReplacementEstimate$720.86Shop/Dealer Price$864.79 - $1243.24
1984 Dodge W100V8-5.9LService typeBrake Drum ReplacementEstimate$1115.85Shop/Dealer Price$1327.00 - $1854.30
Show example Dodge W100 Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Kyle

20 years of experience
20 reviews
Kyle
20 years of experience
Dodge Caliber L4-2.0L - Brake Drum - Lake Villa, Illinois

Josue

11 years of experience
26 reviews
Josue
11 years of experience
Dodge Avenger L4-2.4L - Brake Drum - Sacramento, California
Fast and efficient

David

16 years of experience
636 reviews
David
16 years of experience
Dodge Dakota V8-5.9L - Brake Drum - Oakland, California
David is professional, courteous, and does an excellent job.

Josten

15 years of experience
4 reviews
Josten
15 years of experience
Dodge Dakota V8-4.7L - Brake Drum - Victorville, California
Josten was on time for every appointment, and stayed as long as necessary to complete his job. He did a very thorough inspection of my vehicle and was totally honest in his findings. He gave me a reasonable estimate for my repairs, and even ended up saving me money and charged me less than the original quote. I HIGHLY recommend Josten to anyone needing a mechanic. I've referred my family to him, and I will definitely hire him again if I need to. Thank you, Josten.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Dodge Brake Drum Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Prepare for Driving in the Desert
Inclement Inclement weather and hostile environments pose a danger (https://www.yourmechanic.com/article/5-essential-things-to-know-about-driving-in-bad-weather) to motorists. Plenty of roads go into extremely remote areas, and a good percentage of these will close completely when the weather does not permit safe travel. Desert roads are...
P0474 OBD-II Trouble Code: Exhaust Pressure Sensor Intermittent
P0474 means there is an abnormal voltage reading caused by the exhaust back pressure regulator or a clogged back tube.
P0720 OBD-II Trouble Code: Output Speed Sensor Circuit Malfunction
P0720 means there is an issue with the output speed sensor circuit. Issues may include engine stalling, misfiring and hesitation when accelerating.

Car overheating.

Hi there. The check engine light on this vehicle can turn on from the engine running too cold and too hot. If the coolant level was low from the beginning then the system should have been pressure tested to identify...

The engine klunking and tapping, needs engine replacemet

The reason the shops told you to replace the engine is that they do not overhaul engines. They can only replace it for you with a remanufactured or used engine. An overhaul is a third option but would most likely...

i upgraded from 28.9 in tire to 32.4 in tires. a week later transmission went out, what should i change to relieve strain on trans

The change in shift points generates added heat in terms of operation. Increasing the tire tire diameter more than a percent or two affects the transmission shift points, as the shift points were programmed based on the vehicle's original tire...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com