Chrysler LeBaron Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chrysler LeBaron Car Thermostat Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chrysler LeBaronV6-3.0LService typeCar Thermostat ReplacementEstimate$310.08Shop/Dealer Price$352.45 - $471.46
1993 Chrysler LeBaronV6-3.0LService typeCar Thermostat ReplacementEstimate$301.07Shop/Dealer Price$341.67 - $459.36
1994 Chrysler LeBaronL4-2.5LService typeCar Thermostat ReplacementEstimate$316.31Shop/Dealer Price$360.75 - $489.88
1990 Chrysler LeBaronL4-2.2L TurboService typeCar Thermostat ReplacementEstimate$307.69Shop/Dealer Price$349.97 - $472.64
1992 Chrysler LeBaronL4-2.5LService typeCar Thermostat ReplacementEstimate$307.69Shop/Dealer Price$351.45 - $475.22
1992 Chrysler LeBaronL4-2.5L TurboService typeCar Thermostat ReplacementEstimate$307.69Shop/Dealer Price$350.11 - $472.89
1993 Chrysler LeBaronL4-2.5LService typeCar Thermostat ReplacementEstimate$307.69Shop/Dealer Price$349.99 - $472.67
1990 Chrysler LeBaronL4-2.5L TurboService typeCar Thermostat ReplacementEstimate$307.69Shop/Dealer Price$349.97 - $472.64
Show example Chrysler LeBaron Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Chrysler LeBaron V6-3.0L - Shift Selector Cable - Las Vegas, Nevada
He showed up on time. Replaced shifter cable, and now car runs great.

David

26 years of experience
180 reviews
David
26 years of experience
Chrysler LeBaron V6-3.0L - Thermo Coolant Fan Switch - Ocala, Florida
David went above and beyond Call of Duty it was a wonderful experience no stress

Ernest

14 years of experience
17 reviews
Ernest
14 years of experience
Chrysler LeBaron V6-3.0L - Starter - Winston Salem, North Carolina
fixed my car in a very timely manor. It's greatly appreciated

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Chrysler LeBaron L4-2.2L Turbo - Car does not move when I step on the gas pedal - Conroe, Texas
Arrived on time, very thorough diagnosis, knowledgeable and pleasant to work with.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1
Number of Chrysler LeBaron services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Choose the Best Car Shipping Company
Getting Getting an automobile across a long distance can seem difficult to arrange since you only have a few options to choose from, including driving the vehicle yourself or having someone drive it for you. But a third option that...
How to Take Wax Off Your Car
Keeping Keeping your vehicle shiny and looking new takes some work. Washing your vehicle (https://www.yourmechanic.com/article/how-to-hand-wash-a-car) on a regular basis is a great start, but it also needs to be waxed frequently. While all vehicles come with a clear coat on...
Florida Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Florida. Speed limits in Florida 70 mph: various freeways, rural interstate highways, and some urban highways and rural...

Rear brakes overheating

For proper diagnosis, this issue should be diagnosed firsthand by a professional, such as one from YourMechanic. It could be that one of the calipers is sticking or there is a problem with the ABS system. The problem could also...

Turbo issues with boost

Hi thanks for writing in. The Land Cruiser turbo diesel from that era uses a mechanical waste gate to bypass the exhaust around the turbine when the boost pressure reaches maximum. It should be a quiet and smooth action. It's...

Clunking noise when coming to a sudden stop

Your transmission has relatively low miles and if used in normal service would not be the first suspect. There are a variety of suspension, as well as brake, drivetrain, and motor mount components, that could account for the noise. As...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com