Chrysler Dynasty Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(279)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(279)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chrysler Dynasty Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chrysler DynastyV6-3.3LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1988 Chrysler DynastyL4-2.5LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1990 Chrysler DynastyV6-3.3LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1991 Chrysler DynastyV6-3.3LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1990 Chrysler DynastyV6-3.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1988 Chrysler DynastyV6-3.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1993 Chrysler DynastyV6-3.3LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1991 Chrysler DynastyL4-2.5LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Chrysler Dynasty Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(279)

Rating Summary
267
7
3
0
2
267
7
3
0
2

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Chrysler Dynasty V6-3.3L - Oil Pan - Broomfield, Colorado
He is very down to earth and willing to do whatever it takes to get the job done. I'm very greatful for all the hard work he put in on such a cold day.

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Chrysler Sebring V6-2.7L - Battery - Kansas City, Missouri
Arrived exactly on time with correct battery and tools. Removed front wheel because the battery is in the wheel well. Faster, more dependable and cheaper than the rate quoted by the big gray department store.

Mathew

17 years of experience
66 reviews
Mathew
17 years of experience
Chrysler Town & Country V6-4.0L - Battery - Spring Hill, Florida
Did a great job

Andrew,

5 years of experience
161 reviews
Andrew,
5 years of experience
Chrysler 200 V6-3.6L - Battery - McKinney, Texas
Thank you. Great service. Honest, detailed, and genuine.

Excellent Rating

(279)

Rating Summary
267
7
3
0
2
267
7
3
0
2
Number of Chrysler Car Battery Replacement services completed
3069+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1100+
experts on our platform

Recent articles & questions

P0147 OBD-II Trouble Code: O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 3)
P0147 P0147 code definition O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 3) What the P0147 code means P0147 is the OBD-II generic code indicating the Engine Control Module (ECM) has tested the O2 sensor heater circuit during startup and...
P2648 OBD-II Trouble Code: A Rocker Arm Actuator Control Circuit Low Bank 1
P2648 means there is a problem with a short or open electrical circuit in rocker arm actuator control circuit A due to low oil or a faulty oil valve.
B1377 OBD-II Trouble Code: Oil Change Lamp Circuit Failure
B1377 means there is a malfunction with the oil change lamp circuit, likely due to a defective oil change lamp bulb or circuit.

GWM Steed wont start and engine light and EBD light both on

Hi there. If the engine is not starting, then check the battery and make sure that the battery cables (https://www.yourmechanic.com/services/service-battery-cables) are tight and clean. Check the wires on the starter and see if they are tight and clean. Then scan...

My Toyota corolla 2009 model (1.8 GLI, Mileage 94000 Km ) is very good but since last 2 year on its Mileage 70,000Km, its steering

The issue with your vehicle is either the tires are low on air pressure and need filled up or the Electronic Power Control Motor has stopped working and is no longer allowing the vehicle to have a power steering. If...

I can't access the auxiliary fuse box in my 2003 SL 500

Hi Chibuikem. Unfortunately, we are unable to attach any images or documents through this platform. Your best bet is to purchase a service and repair manual for your Mercedes-Benz SL500, as it should have step-by-step instructions for gaining access to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com