Chevrolet Volt Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(62)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(62)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Volt Fuel Injector Replacement is $300 with $160 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Chevrolet VoltL4-1.4L HybridService typeFuel Injector ReplacementEstimate$475.60Shop/Dealer Price$559.35 - $802.50
2013 Chevrolet VoltL4-1.4L HybridService typeFuel Injector ReplacementEstimate$466.59Shop/Dealer Price$548.57 - $790.40
2015 Chevrolet VoltL4-1.4L HybridService typeFuel Injector ReplacementEstimate$505.13Shop/Dealer Price$596.77 - $867.52
2012 Chevrolet VoltL4-1.4L HybridService typeFuel Injector ReplacementEstimate$466.59Shop/Dealer Price$548.60 - $790.44
2014 Chevrolet VoltL4-1.4L HybridService typeFuel Injector ReplacementEstimate$505.13Shop/Dealer Price$598.25 - $870.10
Show example Chevrolet Volt Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(62)

Rating Summary
62
0
0
0
0
62
0
0
0
0

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Chevrolet Volt L4-1.4L Hybrid - Engine is running louder than normal Inspection - Murrieta, California
He was punctual and friendly. He got a thorough history and examined my car. He researched my car's problem on the internet and explained the likely causes. He gave me pragmatic advise on how I could try to rectify the problem by first putting some fresh gas in the tank. . Finally, he told me what work he would recommend that he do first should the problem not clear up.

William

35 years of experience
731 reviews
William
35 years of experience
Chevrolet Volt L4-1.5L Hybrid - Oil Change - Avondale, Arizona
Wonderful experience

Nathan

11 years of experience
7 reviews
Nathan
11 years of experience
Chevrolet Volt L4-1.4L Hybrid - Car Battery Replacement - Dayton, Ohio
Did the work very professionally and very friendly

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Chevrolet Volt L4-1.4L Hybrid - Pre-purchase Car Inspection - Costa Mesa, California
Manuel was amazing! So thorough and professional. He explained everything so well and really helped with my car purchase decision. Thank you so much, Manuel!!!

Excellent Rating

(62)

Rating Summary
62
0
0
0
0
62
0
0
0
0
Number of Chevrolet Volt services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Upgrade to Synthetic Oil
Choosing to switch your vehicle from conventional oil (https://www.yourmechanic.com/article/what-is-the-difference-between-regular-and-synthetic-motor-oil) to synthetic oil (https://www.yourmechanic.com/article/synthetic-oil-should-you-upgrade-from-conventional-to-synthetic-by-grace-fitzgerald) can be one of the best and easiest choices you can make toward keeping your vehicle in top shape. While the steps to make the switch are...
The Guide to Right-of-Way Laws in Maryland
Right-of-way Right-of-way laws are in place to provide people with the guidance they need to know how to react in the presence of other drivers or pedestrians. They determine who should have the right of way, and who should yield...
How to Get Mercedes-Benz Dealership Certified
Mercedes Benz dealerships offer automotive technician jobs to those certified through Mercedes-Benz's Automotive Systems Technical & ELITE programs.

Why does the check engine light keep coming back on?

The check engine light comes on and stays on if the onboard computer sees a problem that could cause an increase in emissions or a problem with its systems. After looking at most of the possible codes or issues that...

How do I resume cruise control?

If the cruise control has been canceled, it can easily be resumed. When you resume the cruise control, the vehicle will automatically accelerate to the set speed. To resume, simply pull up on the cruise control lever. Tip This feature...

2004 Lincoln ls v6 my car runs bad when cold until it hits normal temp. The breaks are stiff during the warm up process

To identify the cause of poor operation like that you are describing, the cylinder firing patterns have to be looked at on a scope. That diagnostic reveals whether the issue is fuel or ignition related and also which cylinders are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com