Chevrolet Silverado 2500 HD Classic Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet Silverado 2500 HD Classic Intake Manifold Gaskets Replacement is $370 with $104 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 2500 HD ClassicV8-8.1LService typeIntake Manifold Gaskets ReplacementEstimate$881.06Shop/Dealer Price$1034.54 - $1479.59
2007 Chevrolet Silverado 2500 HD ClassicV8-6.0LService typeIntake Manifold Gaskets ReplacementEstimate$717.64Shop/Dealer Price$831.19 - $1164.00
2007 Chevrolet Silverado 2500 HD ClassicV8-6.6L Turbo DieselService typeIntake Manifold Gaskets ReplacementEstimate$486.14Shop/Dealer Price$541.86 - $701.08
Show example Chevrolet Silverado 2500 HD Classic Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0

Scott

39 years of experience
607 reviews
Scott
39 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Denver, Colorado
Excellent job!

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Sugar Land, Texas
He arrived on time and completed the service order timely.

Jermal

34 years of experience
30 reviews
Jermal
34 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.0L - Car does not shift from park to drive - Downey, California
We had called so many mechanics but no one would come out to us we were stuck in parking lot for hours then I gave a call to your mechanic and they sent jermal over Blessing in disguise Amazing service lets us see the problem and fixed it Quick amicable

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Denver, Colorado


Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0
Number of Chevrolet Silverado 2500 HD Classic services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Troubleshoot a Power Moon Roof That Won't Open
Car moon roofs won't open if the tracks are clogged or the cables, electric motor, or moon roof switch is broken.
Michigan Parking Laws: Understanding the Basics
Drivers Drivers in the state of Michigan need to know the laws related to parking. Namely, they need to know where they are not allowed to park. This will help to prevent them from getting parking tickets or getting their...
How to Buy a Good Quality GPS
Even Even if you have a smart phone, there are still reasons to invest in a standalone global positioning system (GPS) navigator for your car. Once a destination is entered, the super easy turn-by-turn navigation allows you to see your...

Did my steering wheel locked up because I did not have any oil in my car?

If you are referring to engine oil, lack of engine oil might cause the engine to stop and that would cause loss of power steering. If, though, you are referring to the power steering hydraulic fluid (the PS system uses...

My 2008 Nissan Sentra tail light/running light fuse keeps blowing. I'll change it and within 2 days it blows again. What u think?

The first thing you should do is replace the rear bulbs for the parking lights since they may be intermittently grounding out inside the bulbs. If still continues then replace front bulbs. If still continues then you will need to...

2008 chevy malibu code p0641

There are two 5 volt reference circuits for vehicle sensors (denoted circuit 1 and 2) each of which are monitored by the vehicle computer. When the code P0614 sets that means that the voltage on Circuit No. 1 is out...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com