logo

Chevrolet Beretta Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(114)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(114)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Beretta Control Arm Assembly Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Chevrolet BerettaV6-3.1LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$428.52Shop/Dealer Price$500.50 - $708.34
1992 Chevrolet BerettaL4-2.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$464.63Shop/Dealer Price$546.12 - $786.48
1994 Chevrolet BerettaL4-2.2LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$712.27Shop/Dealer Price$848.77 - $1253.25
1992 Chevrolet BerettaL4-2.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$365.75Shop/Dealer Price$422.55 - $588.76
1994 Chevrolet BerettaV6-3.1LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$356.75Shop/Dealer Price$406.14 - $545.30
1992 Chevrolet BerettaL4-2.2LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$357.11Shop/Dealer Price$411.89 - $571.73
1990 Chevrolet BerettaL4-2.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$365.75Shop/Dealer Price$422.56 - $588.79
1993 Chevrolet BerettaL4-2.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$337.91Shop/Dealer Price$387.75 - $533.08
Show example Chevrolet Beretta Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Chevrolet Control Arm Assembly Replacement services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(114)
Rating Summary
102
5
4
0
3
102
5
4
0
3

Kiri

21 years of experience
372 reviews
Request Kiri
Kiri
21 years of experience
Request Kiri
by Cierra
Chevrolet Malibu L4-2.4L - Control Arm Assembly Replacement (Front Lower Right) - Philadelphia, Pennsylvania
Kiri was very professional and informative.

Kiri

21 years of experience
372 reviews
Request Kiri
Kiri
21 years of experience
Request Kiri
by James
Chevrolet Impala V6-3.5L - Control Arm Assembly Replacement (Rear Lower Left, Rear Lower Right) - Philadelphia, Pennsylvania
Replaced both trailing arms very quickly and it eliminated the clunking noise.

Scott

39 years of experience
607 reviews
Request Scott
Scott
39 years of experience
Request Scott
by Justin
Chevrolet Trailblazer L6-4.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Denver, Colorado
I have used Scott for a few different services and they have all been top notch!

David

11 years of experience
193 reviews
Request David
David
11 years of experience
Request David
by Brandon
Chevrolet Impala V6-3.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Philadelphia, Pennsylvania
Very accommodating and explained things to me.

Excellent Rating

(114)
Rating Summary
102
5
4
0
3
102
5
4
0
3
Number of Chevrolet Control Arm Assembly Replacement services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How Often Does My Brake Fluid Need a Flush?
A A brake is used to slow down a vehicle to a stop. When the driver steps on the brake pedal, the force is transmitted from the car to the brake calipers and pads through a fluid. The fluid travels...
Read more
The Best Used Cars to Buy If You're a Fisherman
What What do anglers look for, specifically, in their vehicles? Lots of room, plenty of cargo space, and sometimes, the ability to handle rough terrain. Some fishermen also want the option of towing a boat. With that in mind, we...
Read more
The Worst Cities to Break Down In
Here's where you'll find the highest car repair costs, worst public transportation, and congestion.
Read more

heard a snap while pushing on the gas pedal

Hi there, thanks for writing in. It's hard to provide a clear answer with the limited information given. I can say however, that when there is a loud noise when trying to start the car, it's very possible that the...
Read more

My car does not start, it had overheating issues in the past

Sometimes when a heater hose has a leak, coolant will find a way to seep into electrical sensors or ignition components that will impact the vehicle's ability to start. However, if the overheating issue was bad enough, it may have...
Read more

Vehicle will start but turns off when put into gears

Hello, thank you for writing in. When the transmission is put into gear, the engine is demanded to work under slightly different conditions. It is these changes that are likely triggering the engine to stall. The Torque converter lock up...
Read more
  1. Home
  2. Estimates
  3. Chevrolet
  4. Beretta
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE