Audi A3 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(147)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(147)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Audi A3 Power Steering Pump Replacement is $632 with $461 for parts and $171 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Audi A3L4-2.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1378.65Shop/Dealer Price$1689.58 - $2504.22
2012 Audi A3L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1231.59Shop/Dealer Price$1522.09 - $2283.13
2013 Audi A3L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1231.59Shop/Dealer Price$1522.08 - $2283.11
2018 Audi A3L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1212.19Shop/Dealer Price$1476.73 - $2207.39
2011 Audi A3L4-2.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1255.65Shop/Dealer Price$1552.24 - $2331.37
2008 Audi A3L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1187.59Shop/Dealer Price$1467.08 - $2195.11
2013 Audi A3L4-2.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1333.65Shop/Dealer Price$1643.95 - $2458.12
2010 Audi A3L4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1201.59Shop/Dealer Price$1482.24 - $2211.14
Show example Audi A3 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(147)

Rating Summary
138
5
3
0
1
138
5
3
0
1

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Audi A3 L4-2.0L Turbo - Noise from engine or exhaust - Salt Lake City, Utah
Great job

Patrick

11 years of experience
159 reviews
Patrick
11 years of experience
Audi A3 L4-1.8L Turbo - Oil Change - Tempe, Arizona
High recommend!!! Forget the deal ships and auto shops.

Cyrus

35 years of experience
110 reviews
Cyrus
35 years of experience
Audi A3 L4-1.8L Turbo - Car is not starting - Atlanta, Georgia
He was early an very knowledgeable definitely recommend.

Joe

43 years of experience
821 reviews
Joe
43 years of experience
Audi A3 L4-2.0L Turbo - Check Engine Light is on - Tampa, Florida
HELLO YM, JOE WAS VERY PROFESSIONAL. HES WAS PUNCTUAL AND ANSWERED ALL MY QUESTIONS ON HIS VISIT. HE ALSO EXPLAINED AS MUCH AS POSSIBLE (NOT GETTING TOO TECHNICAL) WHAT HE WAS DOING AND FINDING PROBLEMATIC WITH MY AUDI A3. I LEARNED QUITE A FEW THINGS ABOUT MY VEHICLE ALSO. I WOULD HIGHLY RECOMMEND JOE HOUGH AS YOUR MECHANIC TO SERVICE YOUR AUTO, A VERY ENJOYABLE EXPERIENCE AND SOLVED THE PROBLEM HE CAME TO FIX!!! THANK AGAIN JOE, TILL NEXT TIME, DCV IN TAMPA

Excellent Rating

(147)

Rating Summary
138
5
3
0
1
138
5
3
0
1
Number of Audi A3 services completed
1617+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Anti-Lock Relay
If your Check Engine or ABS Lights turn on, or you experience unexpected wheel lock, you may need to replace the anti-lock relay.
Symptoms of a Bad or Failing Wastegate Hose
If you have a turbocharged vehicle, common signs include the Check Engine Light coming on, turbo not producing a boost, and decreasing fuel economy.
P0670 OBD-II Trouble Code: Glow Plug Module Control Circuit
P0670 code means there is an issue with the Glow Plug Control Module often due too poor electrical connection or defective parts.

Automatic transmission problems

Hello. It may be possible that the transmission control module can be reprogrammed, however, only a specialist with the correct equipment and software would be able to do so. If the TCM has failed, it may simply be easier to...

Transmission swaps for ford 460

The T56 is the better of the two transmissions to mate with the 460 motor.

2017 Honda Civic quiet high pitch noise when I press the gas

The noise is most likely related to the operation of the turbocharger. Your vehicle is new enough that any malfunction would be covered by the warranty. To obtain confirmation that the noise is normal you can request warranty assistance from...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com