Mercedes-Benz C220 Evaporative Emission Control Canister Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Evaporative Emission Control Canister Replacement Service

How much does a Evaporative Emission Control Canister Replacement cost?

On average, the cost for a Mercedes-Benz C220 Evaporative Emission Control Canister Replacement is $256 with $161 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz C220L4-2.2LService typeEvaporative Emission Control Canister ReplacementEstimate$436.45Shop/Dealer Price$534.32 - $788.54
1994 Mercedes-Benz C220L4-2.2LService typeEvaporative Emission Control Canister ReplacementEstimate$416.45Shop/Dealer Price$514.35 - $768.59
1995 Mercedes-Benz C220L4-2.2LService typeEvaporative Emission Control Canister ReplacementEstimate$416.45Shop/Dealer Price$514.35 - $768.59
Show example Mercedes-Benz C220 Evaporative Emission Control Canister Replacement prices

What is the Evaporative Emission Control Canister all about?

Have you ever been around a vintage or classic car that emanated a raw fuel odor, yet no leaks were apparent? Gasoline vapors are very harmful if inhaled; they contain damaging chemicals such as benzene and toluene, which can cause headaches, nausea, and breathing problems. Vehicle manufacturers are required to limit the amount of fuel vapors that can be emitted from a vehicle. The evaporative emissions system consists of a charcoal canister, valves, hoses and a sealed fuel cap.

When fuel vapors are produced inside the fuel tank due to evaporation, they are collected inside the charcoal canister, or evaporative emission control canister. At a time determined by the engine control module, the fumes collected in the charcoal canister are purged through a valve and sent into the engine to burn as part of the air/fuel mixture. Dust and dirt from regular driving conditions can accumulate on the emission control canister, causing the purge and vent solenoids or valves to fail. It is also possible for the charcoal canister itself to crack either due to impact or harsh environmental conditions. When this happens, raw fuel or fuel vapors are lost into the environment around your vehicle, and a noticeable fuel smell can occur.

Keep in mind:

  • Many evaporative emissions-related Check Engine light codes are caused by a loose or leaking fuel cap.

How it's done:

  • The evaporative emission control canister is faulty and needs replacement
  • The defective canister is removed
  • The new canister is installed
  • The engine is scanned for codes
  • The vehicle is road tested for proper operation and no check engine light comes on.

Our recommendation:

Though regular maintenance or scheduled replacement is not necessary, the charcoal canister can become clogged from moisture or contaminants in the fuel. If the charcoal canister is damaged and leaking, or if a diagnosis determines the charcoal canister or one of its components is responsible for a Check Engine light illuminating, have the evaporative emission control canister replaced by one of our expert mechanics.

What common symptoms indicate you may need to replace the Evaporative Emission Control Canister?

  • Check Engine light is on
  • Raw fuel smell from the back of your vehicle near the fuel tank

How important is this service?

If the evaporative emission control canister is not replaced when it is diagnosed, other problems with your vehicle may go undetected as the Check Engine light will illuminate for dozens of other reasons. Because fuel vapors are dangerous to inhale, and a fuel leak can cause a fire, you should replace the charcoal canister as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Christopher

8 years of experience
46 reviews
Christopher
8 years of experience
Mercedes-Benz C220 L4-2.2L - Oil/Fluid Leak - Acworth, Georgia
Christopher presented a friendly and professional approach. He throughly explained the diagnosis and ensured that I understood. I highly recommend Christopher.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mercedes-Benz C220 L4-2.2L - Check Engine Light is on - San Francisco, California
Awesome person

Jose

17 years of experience
154 reviews
Jose
17 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - Las Vegas, Nevada
Jose showed up right on time. He was very knowledgeable and completed the job very quickly. He also suggested some other things that I might need but was not pushy. Thank you so much!

Eladio

10 years of experience
148 reviews
Eladio
10 years of experience
Mercedes-Benz C220 L4-2.2L - Car is not shifting into park - Kernersville, North Carolina
Thank you for time yesterday we really appreciate it.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mercedes-Benz C220 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0369 OBDII Trouble Code Camshaft Position Sensor B Circuit Intermittent Bank 1
P0369 P0369 code definition The P0369 code is a notification that the camshaft sent an outgoing signal from position sensor “B” from bank one that was missed at some point. It is an intermittent issue that is an electrical circuit...
How to Change a Sway Bar Link
Sway bar links connect the sway bar to the suspension and chassis. Though sway bar links vary in design, the steps for replacing them are similar.
P0313 OBD-II Trouble Code: Misfire Detected with Low Fuel Level
P0313 means a misfire has been detected in an engine cylinder with a low fuel reading, likely due to an insufficient fuel level or bad ignition coil.

Check engine light comes on, rpm doesn't work

Generally, the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor, a faulty O2 sensor, a bad catalytic...

Car is idling at low speed my check engine light came on

Hi Johnny. There are several components that can cause a low engine idle, and trigger the check engine light from idle control valves, throttle body itself, fuel injectors, mass air flow sensor and more. The light itself is activated when...

Hesitation when coming to a stop

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com