Ford Galaxie 500 Check Engine Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Check Engine Light is on Inspection Service

How much does a Check Engine Light is on Inspection cost?

On average, the cost for a Ford Galaxie 500 Check Engine Light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1973 Ford Galaxie 500V8-5.0LService typeCheck Engine Light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1967 Ford Galaxie 500V8-7.0LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1972 Ford Galaxie 500V8-5.0LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1963 Ford Galaxie 500L6-3.3LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1973 Ford Galaxie 500V8-6.6LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1963 Ford Galaxie 500V8-4.3LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1963 Ford Galaxie 500L6-3.7LService typeCheck Engine Light is on InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1962 Ford Galaxie 500V8-6.4LService typeCheck Engine Light is on InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Galaxie 500 Check Engine Light is on Inspection prices

The Check Engine Light can be one of the most confusing warnings in your dashboard cluster because it offers no explanation as to why you suddenly need to check your engine. It sounds ominous and can be as serious as a malfunctioning catalytic converter or as trivial as a loose gas cap.

How this system works:

The Check Engine Light location and color will vary by vehicle, but in most cases it is a dashboard warning light that is yellow and shaped like an engine. It may or may not have the word “check” integrated into the design.

This indicator is part of the onboard diagnostics (OBD-II) system and in all cases it indicates a problem with your emissions system. Basically, it is an emissions monitoring system. A Check Engine indicator will stay solid or blink.

  • If the indicator is blinking, the situation is usually serious, such as a severe misfiring of the engine. This would allow unburned fuel to dump into the exhaust system, pushing the temperature of your catalytic converter to the breaking point. Slow the car down, find a safe place to stop, and request a mechanic to perform a diagnosis.

  • A steady light on the other hand is not an emergency situation. You can continue driving, but you should schedule an appointment with a mechanic as soon as possible.

Common reasons for this to happen:

While a Check Engine Light can come on for a number of reasons, in most cases it is due to one of the following issues:

  • Loose or damaged gas cap: It’s hard to believe that a gas cap can prompt your check engine light to come on, but it can. Your gas cap acts as the seal for your fuel system and it helps maintain the pressure in your fuel tank. A loose or damaged cap can reduce your gas mileage and increase emissions from your car.

When that annoying yellow light pops on, the first thing you should do is pull over and inspect your gas cap. If it is loose, a quick tighten could very well solve your problem. If it is damaged, head to your local auto parts store for a new one.

Once you have fixed the issue, continue driving to see if the check engine light turns off. If the light stays on, schedule an appointment with a mechanic.

  • Faulty oxygen sensor: An oxygen sensor monitors the exhaust for unburned oxygen, which indicates engine efficacy and the proper air-to-fuel ratio. If you have a faulty sensor, it will not provide the correct data to the onboard computer. The majority of vehicles have two to four sensors. The OBD II code will tell the mechanic which one is giving a reading that is outside of its parameters.

Deterioration of the precious metals inside the oxygen sensor affects the sensors’ ability to give an accurate reading. If you put off getting an oxygen sensor replaced, it will eventually damage your catalytic converter, which can be very costly to replace. Your best bet is to call a mechanic and get a proper diagnosis.

  • Failing catalytic converter: A catalytic converter helps reduce emissions in the exhaust gases. It converts the carbon monoxide and other harmful gases into less harmful emissions. A failing converter will negatively affect your gas mileage and when the damage becomes severe enough, your vehicle won’t go any faster when you push down harder on the gas pedal.

In most cases, a catalytic converter will not fail if you properly maintain your car. A failing converter can be the result of a faulty oxygen sensor that has not been replaced or any other engine efficacy issue.

A broken catalytic converter will eventually bring your car to a complete stop. Before that, your gas mileage will be horrid, the car will not run smoothly, and the car will not pass an emissions test. A damaged converter should be replaced immediately.

  • Faulty mass airflow sensor: This part directs the computer in your vehicle to add the correct amount of fuel based on the air that is coming through the engine. When a mass airflow sensor starts to fail, the car will stall, it will idle poorly, the emissions will go up, and your gas mileage will go down.

An air filter that has never been replaced or improperly installed can sometimes be the culprit when it comes to a faulty mass airflow sensor. Have your air filter checked and replaced on a yearly basis.

While it is possible to drive for months with a malfunctioning mass airflow sensor, it’s not a good idea. Your gas mileage will drop and the car will start stalling frequently. It is best to call a mechanic and have the sensor diagnosed and replaced if necessary.

  • Bad spark plugs and wires: A spark plug acts as a seal in the combustion chamber and provides the gap for the spark that causes combustion in the engine.


While newer cars can go 100,000 miles on a set of plugs, older vehicles, especially those built before 1996, require new plugs roughly every 30,000 miles. There is no way to prevent plugs from failing, it just happens over time. If spark plugs are your issue, get them replaced immediately. A mechanic can make quick work of the job and new plugs in most cases are very affordable.

What to expect:

A top-rated mobile mechanic will come to your home or office to identify the source and cause of the illuminated Check Engine Light, and then check other system components as specific symptoms and issues are identified.

After the inspection, the mechanic will provide a detailed report that describes the diagnosis, along with the scope and cost of the necessary repairs.

How it's done:

When the Check Engine Light is on, your car’s monitoring system will have "fault codes" that indicate the nature of the problem. Your car may have one or more problems and hence there can be multiple codes.

The mechanic will read the codes using a scanner, interpret the codes, and provide a diagnosis. If you approve the repair estimate, they will replace the faulty part(s), clear the memory of any fault codes, turn the Check Engine Light off, and let you drive the car for a few days to see if the light comes back on or not.

Please note: It may take several days of driving the car for the monitoring system to verify that the repair has fixed all the problems. If the monitoring system fails any of its internal tests, it will turn the light back on. This means that the car has more problems that were not evident during the first evaluation. The mechanic will have to perform further diagnosis and create new repair estimates for resolving the problems found. In some rare cases, multiple visits may be required to diagnose and resolve the stubborn Check Engine Light issues.

How important is this service?

A blinking Check Engine Light indicates a critical issue, whereas a solid light reflects a non-emergency situation. Once you rule out a loose gas cap, it’s imperative a mechanic diagnoses the issue as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Robert

25 years of experience
10 reviews
Robert
25 years of experience
Ford Galaxie 500 V8-7.0L - Electronic Ignition Pickup - Brush Prairie, Washington
Robert did a really great job trouble shooting and then fixing the problem. He is a very personable, knowledgeable, and fast. He called ahead and was here when he said he would be. I was very impressed.

Johnny

33 years of experience
289 reviews
Johnny
33 years of experience
Ford Galaxie 500 V8-4.7L - Car is not starting - Rocklin, California
Johnny arrived on time, was very courteous and professional. He was knowledgeable about my specific need. I will definitely hire him again as needed.

Charles

25 years of experience
33 reviews
Charles
25 years of experience
Ford Galaxie 500 V8-5.8L - Install fuel pump - - Tampa, Florida
Charles was on time and very knowledgeable. Got right to work after seeing the issue at hand and wasted no time getting the repair done. Asked questions as he worked and didn't seem to bother him at all. Some mechanics don't like to be to watched while they work or get irritated, not Charles. Answered all my questions, had good recommendations for this older car (1966) and cleaned up the work space prior to leaving.

Alejandro

9 years of experience
82 reviews
Alejandro
9 years of experience
Ford Galaxie 500 V8-6.4L - Car is not starting - Los Angeles, California
Excellent attention to detail. Great service.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford Galaxie 500 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Do I Look Up What Different Codes Mean?
You’re You’re driving your car and everything is going fine when, suddenly, the Check Engine Light comes on. You head home and get out your trusty code reader. You connect it to the OBD II connection under the dash, and...
Symptoms of a Bad or Failing ECM-Power Relay
If there is no power when the key is inserted, the engine will not start, or the battery is dead, you may need to replace the ECM power relay.
P0407 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit Low
P0407 means a problem with the EGR system caused by faulty EGR vacuum solenoid, EGR valve, ground or voltage short in EGR circuit, or bad wiring.

car wont start after pumping gas.

Sometimes the fuel vapor system control valve leaks and causes fumes from the gas tank when filling it. This can get pushed into the engine causing an excessively rich condition (too much fuel) inside the engine. Now when you go...

Car will not stay started

I often hear about getting an oil change then something is wrong afterwards. I can say from experience that that the oil change itself won't cause your car not to start. I explain coincidental failures by relating them to a...

My dodge nitro want accelerate at all

Hi Joseph. Thanks for contacting us today. If the acceleration issues started after replacing the sensor, then it's likely that a reprogram of the throttle body and electronic throttle control did not occur. If these issues happened prior to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com