Mercury Marquis Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(1,341)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(1,341)

Throttle Body Replacement Estimate for Mercury Marquis

Mercury Marquis Throttle Body Replacement costs $565 on average.

CarServiceEstimateShop/Dealer Price
1985 Mercury MarquisL4-2.3LService typeThrottle Body ReplacementEstimate$878.83Shop/Dealer Price$1085.94 - $1679.37
1984 Mercury MarquisV6-3.8LService typeThrottle Body ReplacementEstimate$1208.39Shop/Dealer Price$1502.91 - $2358.52
1985 Mercury MarquisV6-3.8LService typeThrottle Body ReplacementEstimate$1184.75Shop/Dealer Price$1473.36 - $2311.24
1983 Mercury MarquisV6-3.8LService typeThrottle Body ReplacementEstimate$1208.39Shop/Dealer Price$1502.89 - $2358.48
1986 Mercury MarquisL4-2.3LService typeThrottle Body ReplacementEstimate$858.83Shop/Dealer Price$1065.97 - $1659.43
1986 Mercury MarquisV6-3.8LService typeThrottle Body ReplacementEstimate$1184.75Shop/Dealer Price$1473.36 - $2311.24
1984 Mercury MarquisL4-2.3LService typeThrottle Body ReplacementEstimate$862.91Shop/Dealer Price$1069.67 - $1662.32
1983 Mercury MarquisL4-2.3LService typeThrottle Body ReplacementEstimate$862.91Shop/Dealer Price$1070.04 - $1662.98
Show example Mercury Marquis Throttle Body Replacement prices

Throttle Body Replacement Service

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(1,341)

Rating Summary
1,257
48
9
6
21
1,257
48
9
6
21

Matthew

33 years of experience
1173 reviews
Matthew
33 years of experience
Mercury Grand Marquis V8-4.6L - Throttle Body - Norfolk, Virginia
This was the second time I used him. He know his stuff. Will be using him again.

Paul

16 years of experience
16 reviews
Paul
16 years of experience
Mercury Milan L4-2.5L - Throttle Body Replacement - Dallas, Texas
Paul was friendly. He took the time to explain to me the problem. I was very impressed.

Jacob

16 years of experience
12 reviews
Jacob
16 years of experience
Mercury Milan V6-3.0L - Throttle Body Replacement - Oklahoma City, Oklahoma
Jacob is an amazing mechanic, knowledgeable, very friendly and honest. Explained everything he was doing to my car. So glad to have Jacob as my mechanic. Thank you so much!!!!

David

16 years of experience
634 reviews
David
16 years of experience
Mercury Sable V6-3.0L - Heater is not working - Vacaville, California
David was wonderfull.

Excellent Rating

(1,341)

Rating Summary
1,257
48
9
6
21
1,257
48
9
6
21
Number of Mercury services completed
14751+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Does a Clutch Safety Switch Last?
The The clutch safety switch is located on vehicles with manual transmissions. For vehicles with automatic transmissions, this part is called the neutral safety switch and has a similar role. The neutral safety switch prevents the vehicle from turning on...
How to Care for Your Car Battery
How How to Care For Your Car Battery Your car’s battery may have been neglected if you have difficulty starting your car, and it is usually when the weather turns...
The Traveler’s Guide to Driving in Mexico
Mexico Mexico has a rich culture and a long history, as well as some stunning attractions. Whether you are looking for historical sites, museums, or the beaches, there is something for you in Mexico. You could visit the ruins of...

Car overheating and the fan not working.

Hello. Cooling fan failure has been linked to the temperature switch going bad. I would recommend having a technician come out and test the switch and back-probe the fan to verify that it works. I would also recommend having a...

Had oil changed, filter was not put in correctly and now have a p0014 code.

Hi there. This article on what the P-0014 OBD-II trouble code is, what causes it and how it is resolved might shed some light on this issue. The only item that may have caused damage to this sensor would be...

I have a 2002 Toyota Camery v6 with only 94,000 miles on it. The other day I drove my car like always and when put it in park my car started shaking and the idle dropped. And jerked until it stalled and I could not start it again without pumping a lot of gas.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com