Jeep J-200 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(20)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(20)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Jeep J-200 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Jeep J-200L6-3.8LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1965 Jeep J-200V8-5.3LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1963 Jeep J-200L6-3.8LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1965 Jeep J-200L6-3.8LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Jeep J-200 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(20)

Rating Summary
18
2
0
0
0
18
2
0
0
0

Steve

40 years of experience
105 reviews
Steve
40 years of experience
Jeep Wrangler L6-4.0L - Engine is misfiring - West Palm Beach, Florida
Awesome guy to work with, knows his stuff, would recommend to anyone!

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Jeep Patriot L4-2.4L - Engine is misfiring - Everett, Washington
Theo was awesome. He got me rolling again in no time.

Bill

32 years of experience
52 reviews
Bill
32 years of experience
Jeep Grand Cherokee V8-5.7L - Engine is misfiring - Littleton, Colorado
Bill's diagnostic work was prompt, informed, and thoughtful. His explanations were very helpful and easy to understand, and he went above and beyond to solve the problem. Bill was friendly and personable, and overall working with him has been a great experience.

Daniel

9 years of experience
42 reviews
Daniel
9 years of experience
Jeep Grand Cherokee V6-3.7L - Engine is misfiring - Fort Lauderdale, Florida
Great overall experience, Daniel was able to properly diagnose the issue with my jeep. Ill definitely recommend your mechanic to all my friends.

Excellent Rating

(20)

Rating Summary
18
2
0
0
0
18
2
0
0
0
Number of Jeep Engine is misfiring Inspection services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan Altima
While While it may not be quite as modern and sporty looking as some other models, the 2012 Nissan Altima is still a huge contender in the mid-size sedan category. With both four- and six-cylinder options and a CVT (continuously...
5 Essential Things to Know About Luxury Vehicles
There’s There’s something to be said about the looks and offerings of luxury vehicles, but appearances can always be deceiving. If you’re considering buying a luxury car, there are a few things you need to know before you make your...
The Best Used Cars to Buy If You're a Skier
When When summer ends, skiers start thinking about hitting the hills, and that means having to contend with winter driving conditions. Not just any vehicle is going to get the job done. We have evaluated several used ski-worthy vehicles, and...

Key turns freely in the ignition but won't start the vehicle. Accessory power remains on unless the battery is disconnected.

The ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) or linkage to the switch is broken. The ignition switch needs to have the small linkage from the back side of the key lock cylinder to turn the switch to start and run the vehicle. Have...

Can't read OBD code with my scanner.

These aftermarket type scanners may not access every vehicle out there. When you get a cannot communicate issue this is most likely the OBD adapter and the vehicle may be incompatible or the vehicle has problems. You would need to...

What is the purpose of having 2 thermostats in a 2013 crystler 200

Your vehicle has two thermostats, a primary and a secondary. The primary and secondary thermostats have different temperature profiles with respect to their opening temperature because they are located on different areas of the engine. The primary thermostat is located...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com