Ford Galaxie 500 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Ford Galaxie 500 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Ford Galaxie 500L6-3.9LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1963 Ford Galaxie 500V8-5.8LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1964 Ford Galaxie 500V8-7.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1964 Ford Galaxie 500V8-5.8LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1966 Ford Galaxie 500L6-3.9LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1966 Ford Galaxie 500V8-7.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1973 Ford Galaxie 500V8-5.8LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1967 Ford Galaxie 500V8-7.0LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Galaxie 500 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Johnny

33 years of experience
264 reviews
Johnny
33 years of experience
Ford Galaxie 500 V8-4.7L - Car is not starting - Rocklin, California
Johnny arrived on time, was very courteous and professional. He was knowledgeable about my specific need. I will definitely hire him again as needed.

Charles

25 years of experience
33 reviews
Charles
25 years of experience
Ford Galaxie 500 V8-5.8L - Install fuel pump - - Tampa, Florida
Charles was on time and very knowledgeable. Got right to work after seeing the issue at hand and wasted no time getting the repair done. Asked questions as he worked and didn't seem to bother him at all. Some mechanics don't like to be to watched while they work or get irritated, not Charles. Answered all my questions, had good recommendations for this older car (1966) and cleaned up the work space prior to leaving.

Alejandro

9 years of experience
82 reviews
Alejandro
9 years of experience
Ford Galaxie 500 V8-6.4L - Car is not starting - Los Angeles, California
Excellent attention to detail. Great service.

Robert

25 years of experience
10 reviews
Robert
25 years of experience
Ford Galaxie 500 V8-7.0L - Electronic Ignition Pickup - Brush Prairie, Washington
Robert did a really great job trouble shooting and then fixing the problem. He is a very personable, knowledgeable, and fast. He called ahead and was here when he said he would be. I was very impressed.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford Galaxie 500 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

4 Essential Things to Know About Your Car’s Parking Brake
The parking brake is also called the emergency brake, or hand brake, and is used to keep the vehicle in place. The...
Symptoms of a Bad or Failing Hydraulic Brake Booster
Common signs include less braking power, a brake pedal that is hard to press, and fluid leaks.
P0175 OBD-II Trouble Code: P0175 System Too Rich (Bank 2)
P0175 code definition P0175 System Too Rich (Bank 2) What the P0175 code means P0175 indicates that the Engine Control Module (ECM)...

Windshield wipers and horn not working

Hello. The first thing to check is all the fuses. If all the fuse are good, a scanner needs to be connected to car to check for code and data. Everything in the column and steering wheel goes through the...

I am having a problem with my AC/Heat button turning on in my car

This sounds like a bad switch in your dash. The fact that nothing lights up would suggest there is no power getting to the switch. I would recommend having the actual A/C button/switch (https://www.yourmechanic.com/services/ac-control-switch-replacement) tested for continuity to be sure...

why does the air not blow out the vents?when I hit a bump it kicks on but doesn't come back on if I turn tne car ofg.

It sounds like your mode door is not moving to the correct position to allow air flow through the panel vents. I would recommend having your mode door actuator tested to determine if it is functioning properly. The most likely...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com