Dodge Wm300 Power Wagon Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(26)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(26)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Dodge Wm300 Power Wagon Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Dodge Wm300 Power WagonL6-4.3LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1962 Dodge Wm300 Power WagonV8-5.2LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1963 Dodge Wm300 Power WagonL6-4.1LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1960 Dodge Wm300 Power WagonV8-5.2LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1961 Dodge Wm300 Power WagonL6-4.1LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1960 Dodge Wm300 Power WagonV8-5.1LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1960 Dodge Wm300 Power WagonL6-4.1LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1965 Dodge Wm300 Power WagonL6-4.1LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Dodge Wm300 Power Wagon Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(26)

Rating Summary
26
0
0
0
0
26
0
0
0
0

Xavier

11 years of experience
29 reviews
Xavier
11 years of experience
Dodge Ram 1500 V8-4.7L - Engine is misfiring - Plano, Texas
He was adamant on fixing my truck and did just so with no hesitation!

Joseph

20 years of experience
644 reviews
Joseph
20 years of experience
Dodge Grand Caravan V6-3.6L - Engine is misfiring - Salt Lake City, Utah
Fantastic experience! I’ll never go back to traditional repair shops. Josephs is great and very transparent with what he is doing. 100% recommend.

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Dodge Ram 1500 V6-3.7L - Engine is misfiring Inspection - Tulsa, Oklahoma
This guy is the real deal.! If you want somebody who's honest and willing to help with anything this is the guy to call

Eladio

10 years of experience
148 reviews
Eladio
10 years of experience
Dodge Dakota V6-3.7L - Engine is misfiring - High Point, North Carolina
excellent

Excellent Rating

(26)

Rating Summary
26
0
0
0
0
26
0
0
0
0
Number of Dodge Engine is misfiring Inspection services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Roadside Emergency Kit
No No one ever likes to think of an emergency happening while driving, such as a flat tire, running out of gas, the car breaking down, etc. Unfortunately these things do happen though, and for that reason it’s best to...
P3449 OBD-II Trouble Code: Cylinder l7 Deactivation/Intake Valve Control Circuit/Open
P3449 means there is an issue with the Engine Control Module via the intake valve due to low oil pressure, or faulty solenoid.
10 Best Automotive Hand Tools
Automotive technician jobs require hand tools for repairing cars. Klutch has a 566 piece hand tool kit that comes with a lifetime guarantee.

Problems with fuel system

Hi, in this case it could be any of these things that you've mentioned. I would start at checking the battery for proper voltage. If voltage is correct then I would check the fuel pump and relay. If there is...

car sat for 14 days and now won't start even after turning it off after jumping it.

From what you've described, it sounds like your battery is not capable to hold a charge anymore for long periods of time. I suggest having the battery and charging system checked. Have a certified technician, like one from YourMechanic, diagnose...

Received Error code: P7011. 2012 Elantra GLS Automatic. Engine light is on.

Hello. P7011 is the trouble code for a fault in the transmission temperature sensor's range. The most common cause of this is a faulty transmission temperature sensor, which is located on the transmission, mounted on the valve body. If the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com