BMW 1802 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(28)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(28)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a BMW 1802 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1971 BMW 1802L4-1.8LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example BMW 1802 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(28)

Rating Summary
25
2
0
0
1
25
2
0
0
1

Joseph

20 years of experience
644 reviews
Joseph
20 years of experience
BMW 328i L6-3.0L - Engine is misfiring - Clearfield, Utah
Joseph seemed to know everything about the BMW.

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
BMW 750Li V8-4.8L - Engine is misfiring - Norfolk, Virginia
The best

Alex

22 years of experience
112 reviews
Alex
22 years of experience
BMW 740Li L6-3.0L Turbo - Engine is misfiring - Queen Creek, Arizona
Extremely qualified and articulate . Very knowledgable regarding my BMW. Highly recommended.

Tim

15 years of experience
57 reviews
Tim
15 years of experience
BMW 335i xDrive L6-3.0L Turbo - Engine is misfiring - Battle Ground, Washington
This was the first time I have had a mechanic to my house and the experience was excellent. Tim explained what he saw and what he was doing, he had a way of talking at my level of experience without the typical condescending tone you can get from someone smarter than yourself. I also did not feel that he was trying to upsell me on services I didn't need. Great experience and I will definitely be calling Tim back to work on the rest of my fleet.

Excellent Rating

(28)

Rating Summary
25
2
0
0
1
25
2
0
0
1
Number of BMW Engine is misfiring Inspection services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Hyundai Equus
It’s It’s only fair to start this guide by equipping readers with the proper pronunciation – the luxury Hyundai with the funny name is said “ek-wuss.” With that out of the way, this sedan with the odd moniker may not...
The Guide to Legal Car Modifications in Montana
ARENA Creative / Shutterstock.com Whether you currently live in Montana or plan to move there, you will need to know the regulations that govern modified vehicles. The following information will help ensure that the modifications you make...
P0264 OBD-II Trouble Code: Cylinder 2 Injector Circuit Low
P0264 P0264 code definition Cylinder 2 Injector Circuit Low What the P0264 code means This diagnostic trouble code (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) indicates that the powertrain control module (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) has detected a lower reference voltage from the fuel injector on the number 2...

Car stalls when it is heated up

These vehicles have a lot of issues with the wiring modules and harness connectors. The pins and connectors are really small and can loose contact really easily. The reason the MAF and fuel pump is going bad is not the...

Need to know if I need to have brakes replaced at the same time as the master cylinder?

Hi, thanks for writing in. I'd be happy to provide my insight. You do not automatically need to replace the brakes with the master cylinder. When facing brake issues, always do a full inspection. Brakes are such a critical safety...

Grinding noise when steering left or right.

This is a common symptom of failing wheel bearings. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of the rollers and the race...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com