BMW 1602 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(28)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(28)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a BMW 1602 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1967 BMW 1602L4-1.6LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1969 BMW 1602L4-1.6LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1970 BMW 1602L4-1.6LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1968 BMW 1602L4-1.6LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1971 BMW 1602L4-1.6LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
Show example BMW 1602 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(28)

Rating Summary
25
2
0
0
1
25
2
0
0
1

David

36 years of experience
195 reviews
David
36 years of experience
BMW 528i L6-3.0L - Engine is misfiring - Placentia, California
David was on time, professional, and knew his stuff!

Arturo

27 years of experience
303 reviews
Arturo
27 years of experience
BMW 528i L6-2.8L - Engine is misfiring - La Mesa, California
Well informed and honest.

Jason

15 years of experience
344 reviews
Jason
15 years of experience
BMW 750Li xDrive V8-4.4L Turbo - Engine is misfiring - Franklin Square, New York
Through. Knows his stuff. Nice person

James

31 years of experience
694 reviews
James
31 years of experience
BMW 525i L6-3.0L - Engine is misfiring - Irvine, California
Responsible and experienced!

Excellent Rating

(28)

Rating Summary
25
2
0
0
1
25
2
0
0
1
Number of BMW Engine is misfiring Inspection services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive While Taking Antihistamines?
Of Of course you know better than to drive while impaired by alcohol, and you would never drive while using illegal drugs. But what about those over-the-counter remedies that bring relief from common ailments, like the flu, a cold, or...
P3443 OBD-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit Low
What What the P3443 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module recognizes that the measured values from the throttle position (TP) sensor, the manifold absolute...
How to Replace an EVP Shut Off Solenoid
An EGR valve is essential to the EGR system in your vehicle. For this valve to work, the EVP shut off solenoid must monitor its position and function.

Is My Rear Wiper Legally Required to Operate?

Federal Motor Vehicle Safety Standards (FMVSS) specify that manufacturers must include rear wipers on all new motor vehicles sold in the United States. However, current FMVSS standards do not require that a passenger motor vehicle be equipped with a rear...

Passenger-side brake light won't work even after replacing bulb

Since the problem is only on one side, you can rule out the fuse and other parts of the circuit that are shared by both bulbs. I would look closely at the connector for the nonfunctional bulb, as it may...

Heater not working on 2012 ram turbo diesel 3500 when I turn truck off water leaks all over but coolant is all there

That sounds like a water pump leaking. In many cases the water pump seal can leak while the truck is parked, but not while it is running. In other cases it may leak when the engine is cold, but not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com