Mercedes-Benz SLK250 Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Mercedes-Benz SLK250 Headlight Bulb Replacement is $169 with $29 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$212.02Shop/Dealer Price$232.58 - $280.07
2014 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.47 - $265.65
2013 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$203.01Shop/Dealer Price$220.52 - $265.72
2014 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$203.01Shop/Dealer Price$220.52 - $265.72
2015 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$223.09 - $270.23
2013 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.76 - $266.15
2015 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$203.01Shop/Dealer Price$220.54 - $265.77
2012 Mercedes-Benz SLK250L4-1.8L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.52 - $265.72
Show example Mercedes-Benz SLK250 Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Tracy

15 years of experience
23 reviews
Tracy
15 years of experience
Mercedes-Benz SLK250 L4-1.8L Turbo - Headlight Bulb Replacement (Passenger Side Low Beam) - Austin, Texas
Tracy is the best ever!

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Mercedes-Benz SLK250 L4-1.8L Turbo - Car Battery Replacement - Hayward, California
Tien was great to work with.

Justin

9 years of experience
372 reviews
Justin
9 years of experience
Mercedes-Benz SLK250 L4-1.8L Turbo - Battery - Boynton Beach, Florida
very effecient and professional

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Mercedes-Benz SLK250 L4-1.8L Turbo - Car is not starting - Happy Valley, Oregon
Andrew arrived early to his appointment and was very quick and efficient! I am very pleased with the seamless transaction and work.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Mercedes-Benz SLK250 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 GMC Yukon Hybrid
The The GMC Yukon is about as big and powerful as any SUV can ever get. However, in the past, that also meant paying a large sum every time you hit the pump. GMC has addressed this problem with their...
P0438 OBD-II Trouble Code: Catalyst Temperature Sensor High (Bank 2)
P0438 means the catalytic convertor is not functioning properly at 100% efficency
P0323 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Intermittent
Trouble code P0323 means the powertrain control module (PCM) detects an erratic signal from the crankshaft position sensor or the distributor.

Power motor window fuse keeps blowing on a 2001 F150

Generally, it means that the motor itself is shorted out (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-window-motor-regulator-assembly) and it's just popping the fuse (https://www.yourmechanic.com/article/how-to-check-fuses-by-rocco-lovetere). That's almost always what it is. You can take the door panel apart and you can disconnect the motor from the switch...

No power on purple wire in start position....new starter..runs if i jump relay

Hello. If there is no ground getting to the starter relay then the computer is not energizing it. Typically when this occurs it is due to the computer not receiving a signal from the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) or from the...

What is the name of the clip that holds the slave cylinder line into the slave cylinder 1994 Ford Explorer

Hi there. The clip comes as part of the slave cylinder. The clip is called a quick release line clip. This is a plastic retainer that puts pressure on the line to hold it in place. Typically you cannot purchase...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com