Lincoln Mark VII Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lincoln Mark VII Control Arm Assembly Replacement is $435 with $155 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1072.18Shop/Dealer Price$1229.90 - $1654.85
1991 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$975.00Shop/Dealer Price$1152.17 - $1669.25
1991 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1041.55Shop/Dealer Price$1188.90 - $1606.08
1991 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$807.09Shop/Dealer Price$895.82 - $1137.15
1992 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1454.47Shop/Dealer Price$1713.81 - $2447.25
1992 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$957.02Shop/Dealer Price$1130.27 - $1634.30
1990 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$807.09Shop/Dealer Price$895.91 - $1137.31
1991 Lincoln Mark VIIV8-5.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$957.02Shop/Dealer Price$1129.78 - $1633.44
Show example Lincoln Mark VII Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0

Ejnar

30 years of experience
107 reviews
Ejnar
30 years of experience
Lincoln Mark VII V8-5.0L - Alternator - Fremont, California
Very competent ......

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Lincoln Mark VII V8-5.0L - Coolant is leaking - Fremont, California
Very Satisfied .Show a lot care and professionalism , very meticulous and Honest . Was really impressed and shall call on you for any kind of help Thank you so much My sincere compliment to Jason. Samir Hamade

Simon

28 years of experience
378 reviews
Simon
28 years of experience
Lincoln Mark VII V8-5.0L - Tune-up - Glenn Dale, Maryland
Timely, Professional and knew his business. Went right to work and diagnosed the problem and made the proper recommendations. the best mechanic I have encountered in some time.....

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
Lincoln Mark VII V8-5.0L - Car is not starting - Fresno, California
Johnathon is awesome. This is the second time he has worked on one of my vehicles. Both jobs were done efficiently and results are 100%. Don’t hesitate to request him, you won’t be unhappy.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0
Number of Lincoln Mark VII services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Veteran and Military Driver Laws and Benefits in Kansas
The The state of Kansas offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration fee waiver Disabled veterans...
P2327 OBD-II Trouble Code: Ignition Coil J Primary Control Circuit Low
P2327 P2327 code definition Ignition Coil J Primary Control Circuit Low What the P2327 code means This trouble code indicates that the powertrain control module has detected a malfunction within the ignition coil circuit that is associated with it. What...
Chevrolet Certified Pre-Owned (CPO) Car Program
Drivers Drivers who are in the market for a used Chevrolet vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...

Dash lights came on and gauges dropped to zero

Hello there, thanks for writing in about your 2006 Chevrolet Trailblazer EXT. First, I would suspect a faulty ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), and would put that near the top of my diagnostic checklist. I also recommend a thorough visual inspection, testing...

Uneven tire wear and excessive shaking in the steering wheel once hitting highway speeds.

Hi there, thanks for writing in. Based on your description of the symptoms and tire wear, it seems that your mechanic probably is correct. When the tie rod and ball joints (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-tie-rod-end) are damaged, they will cause the suspension to...

2012 Jeep weird sound at front end

Hello. Thanks for writing in. When it comes to strange noises, the best thing to do is locate the exact place its coming from. The first test should be trying to replicate the noise while at idle. If you can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com