Isuzu Ascender Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Isuzu Ascender Fuel Injector Replacement is $774 with $522 for parts and $252 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2003 Isuzu AscenderL6-4.2L	Service typeFuel Injector Replacement	Estimate$2957.40	Shop/Dealer Price$3535.06 - $5230.78
2005 Isuzu AscenderL6-4.2L	Service typeFuel Injector Replacement	Estimate$2943.85	Shop/Dealer Price$3520.36 - $5230.91
2005 Isuzu AscenderV8-5.3L	Service typeFuel Injector Replacement	Estimate$3173.94	Shop/Dealer Price$3905.08 - $6090.96
2003 Isuzu AscenderV8-5.3L	Service typeFuel Injector Replacement	Estimate$2617.06	Shop/Dealer Price$3208.98 - $4977.19
2008 Isuzu AscenderL6-4.2L	Service typeFuel Injector Replacement	Estimate$1734.61	Shop/Dealer Price$2015.70 - $2824.49
2007 Isuzu AscenderL6-4.2L	Service typeFuel Injector Replacement	Estimate$1714.81	Shop/Dealer Price$1984.82 - $2774.16
2006 Isuzu AscenderL6-4.2L	Service typeFuel Injector Replacement	Estimate$2943.85	Shop/Dealer Price$3520.55 - $5231.24
2004 Isuzu AscenderV8-5.3L	Service typeFuel Injector Replacement	Estimate$2617.06	Shop/Dealer Price$3208.98 - $4977.19

Show example Isuzu Ascender Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(32)

Rating Summary

30

2

0

0

0

30

2

0

0

0

SEE REVIEWS NEAR ME

Ruben

36 years of experience

83 reviews

Ruben

36 years of experience

by JayCee

Isuzu Ascender L6-4.2L - Brake Pads Replacement (Front) - Seffner, Florida

I really appreciated everything he did. I had more wrong with my car then originally thought and he was able to order the part and come back the next day to get everything done. He really made me feel like I was a priority.

Travis

11 years of experience

296 reviews

Travis

11 years of experience

by Patricia

Isuzu Ascender L6-4.2L - Shift Selector Cable Replacement - Friendswood, Texas

Polite and efficient. Got straight to work, didn’t stand around talking

Martin

30 years of experience

166 reviews

Martin

30 years of experience

by John

Isuzu Ascender L6-4.2L - Car is shaking or vibrating - Hendersonville, Tennessee

Very nice and knowledgeable. Quickly diagnosed my vehicles problem(s)

Joseph

34 years of experience

540 reviews

Joseph

34 years of experience

by Todd

Isuzu Ascender L6-4.2L - Variable Valve Timing (VVT) Solenoid - Plano, Texas

Great service and price!

Excellent Rating

(32)

Rating Summary

30

2

0

0

0

30

2

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

5 Common Reasons Why Your Car Door Isn’t Locking Properly

Are your power locks keeping you from getting into your car, or locking it when you leave? You need to know what’s...

An Auto Auctioneer’s Guide to the 10 Worst Cars Today

Car auctioneers often use the Long-Term Quality Index to calculate reliability. The Dodge Journey is evaluated as being the least reliable car.

How Long Does a Brake Caliper Last?

The The braking system on your car has a variety of different parts that have to work together in order to bring the car to a stop. Most car owners take their braking system for granted until there is a...

Can't get distributor times correctly

You will need to set the crankshaft to No. 1 top dead center or TDC. There should be marks on the crank pulley that indicates where this is. If you have already done this, you may be 180 degrees out....

Fuel line replacement cost

Hi there: Fuel lines these days are typically made of a high-temperature grade polymer or nylon, that is highly resistant to wear and tear vs. the old rubber or plastic lines of yesterday. However, on a 2012 Kia Soul, a...

Jerking (Suffocating)

This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com