GMC Sierra 3500 Classic Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a GMC Sierra 3500 Classic Ignition Switch Replacement is $276 with $136 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-6.0LService typeIgnition Switch ReplacementEstimate$427.50Shop/Dealer Price$499.23 - $706.30
2007 GMC Sierra 3500 ClassicV8-8.1LService typeIgnition Switch ReplacementEstimate$418.49Shop/Dealer Price$488.45 - $694.20
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeIgnition Switch ReplacementEstimate$418.49Shop/Dealer Price$488.47 - $694.24
Show example GMC Sierra 3500 Classic Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Gabriel

14 years of experience
39 reviews
Gabriel
14 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

ERIK

15 years of experience
14 reviews
ERIK
15 years of experience
GMC Envoy XL L6-4.2L - Ignition Switch - Orlando, Florida
He was helpful, efficient, and worked in a timely manner. I would most definitely recommend him to others.

Rodrigo

16 years of experience
133 reviews
Rodrigo
16 years of experience
GMC C3500 V8-7.4L - Ignition Switch - Las Vegas, Nevada
Excellent work ethic very methodical. Job well done very happy.

Dustin

9 years of experience
21 reviews
Dustin
9 years of experience
GMC Yukon V8-5.7L - Ignition Switch - Tucson, Arizona
On time.. job well done.. very clean afterwards. Will call him again. Good service..

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of GMC Ignition Switch Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes-Benz E-Class
The The Mercedes-Benz E-Class is a midsize luxury vehicle that has been one of the most popular options for a number of years. The 2012 models, which now include a coupe, a wagon, and a convertible as well as the...
A Buyer’s Guide to the 2012 Lexus LFA
When When it comes to supercars, Lexus probably isn’t the first name that comes to mind. The 2012 Lexus LFA was the automaker’s attempt to change that. It’s a compact coupe that seats two and offers blistering acceleration. However, the...
Disabled Driver Laws and Permits in Alabama
Each Each state is unique in its requirements for disabled drivers. The following are some of the qualifications you must have in the state of Alabama to receive a disabled driver license plate or placard. Qualifications for disabled status You...

Oil leaking into spark plugs galley, car won't start

If you found oil has entered the spark plug tube galley then the oil may have shorted out all the coils and plug wires causing the engine no start. (https://www.yourmechanic.com/services/car-is-not-starting-inspection) The oil is getting in the galley from a leaking...

My back up camera shows a blue screen

Hi there. It sounds like the camera has failed or has lost connection. The cameras for these systems are prone to failing and it does happen often. To check for a loose connection remove the trunk lid cover and inspect...

Kia Optima hesitates when in gear. Does not while in park. It has slowly became worse over the course of many months. It still dr

If the transmission is not faulty (e.g., clutches slipping) and thus the problem is engine related, among the possible causes of the hesitation are faults in the throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement), mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), vacuum leaks, a clogged fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com