Chevrolet S10 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(335)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(335)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet S10 Front Crankshaft Seal Replacement is $156 with $16 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chevrolet S10ElectricService typeFront Crankshaft Seal ReplacementEstimate$268.80Shop/Dealer Price$290.31 - $344.29
1998 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$222.77Shop/Dealer Price$233.40 - $259.92
2000 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$222.77Shop/Dealer Price$233.43 - $259.98
1990 Chevrolet S10L4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$232.99Shop/Dealer Price$246.20 - $280.41
1991 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$232.99Shop/Dealer Price$248.12 - $283.77
1990 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$232.99Shop/Dealer Price$246.38 - $280.73
1995 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$222.77Shop/Dealer Price$233.45 - $260.01
2004 Chevrolet S10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$289.25Shop/Dealer Price$316.53 - $392.93
Show example Chevrolet S10 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(335)

Rating Summary
309
12
5
1
8
309
12
5
1
8

Jimmy

30 years of experience
186 reviews
Jimmy
30 years of experience
Chevrolet S10 L4-2.2L - Fuel Filter - Concord, North Carolina
Jimmy was the best. Got the job done even though the wiring instructions for the part was wrong. He just knows his stuff...

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Chevrolet S10 V6-4.3L - Distributor Rotor and Cap - Charlotte, North Carolina
WOW and WOW. I wish I had known about this years ago. Jeffery showed up ahead of schedule and proceeded to evaluate the problem with my S10 as to why it would not turn over. He was extremely through during the procedure and finally found the problem. And all this was done in the pouring rain. Jeffery kept a very positive attitude and is very personable. After he found the problem he got the parts and repaired it quickly. I am so impressed with the service that was provided. With all types of people offering this kind of service the only way to rise above the rest is to provide the best possible customer care that you can and Jeffery did just that and excelled at it. I will spread the word and recommend him and his company to everyone I can. I could not be more pleased. Great service and great pricing. As a retired person, this was extremely helpful with our budget.

Fernando

14 years of experience
160 reviews
Fernando
14 years of experience
Chevrolet S10 V6-4.3L - Car is not starting - Everett, Washington
great guy friendly and easy to talk too

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Chevrolet S10 L4-2.5L - Starter - Orlando, Florida
Allen did a great job.

Excellent Rating

(335)

Rating Summary
309
12
5
1
8
309
12
5
1
8
Number of Chevrolet S10 services completed
3685+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Starter Last?
You turn the key in the ignition of your car and the engine cranks – that’s about as far as most drivers get...
P0492 OBD-II Trouble Code: Secondary Air Injection System Insufficient Flow Bank
P0492 means there is a problem with the secondary air injection system, often due to intake leaks or faulty one-way check valves.
How to Buy a Good Quality Camshaft Position Sensor
The The camshaft position sensor is a vital part of your engine’s ability to function properly. It detects the position, speed, acceleration and deceleration of the camshaft, which regulates the injection of fuel into the engine. In order to make...

Fan only works on highest speed. 2008 Volkswagen Passat

Hi there, thanks for writing in about your 2008 Volkswagen Passat. If the blower motor resistor and connector are good, then the only other thing that can cause the problem is the blower control switch or connector. Check the resistor...

Why won't my car stay running when it is cold

Hello, thank you for writing in. The vehicle may be suffering from several different issues. Depending on how cold the weather is, you may want to consider setting your car up for colder weather. This would include a thinner oil,...

Replaced neutral saftey switch but code p1121 is still coming up.

Hi there. There are two possible reasons why the code is still popping up. Typically when an error code is stored in the ECU, and a repair is made, the original code is still stuck in the ECU. In most...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com