Buick Roadmaster Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Buick Roadmaster Power Steering Pump Replacement is $309 with $113 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Buick RoadmasterV8-5.7LService typePower Steering Pump ReplacementEstimate$449.72Shop/Dealer Price$512.94 - $691.26
1994 Buick RoadmasterV8-5.7LService typePower Steering Pump ReplacementEstimate$454.91Shop/Dealer Price$516.64 - $695.64
1991 Buick RoadmasterV8-5.0LService typePower Steering Pump ReplacementEstimate$430.13Shop/Dealer Price$489.16 - $660.42
1993 Buick RoadmasterV8-5.7LService typePower Steering Pump ReplacementEstimate$451.71Shop/Dealer Price$512.67 - $689.30
1995 Buick RoadmasterV8-5.7LService typePower Steering Pump ReplacementEstimate$557.10Shop/Dealer Price$623.41 - $805.84
1996 Buick RoadmasterV8-5.7LService typePower Steering Pump ReplacementEstimate$600.52Shop/Dealer Price$674.75 - $887.55
Show example Buick Roadmaster Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(35)

Rating Summary
31
2
0
1
1
31
2
0
1
1

Casey

17 years of experience
44 reviews
Casey
17 years of experience
Buick Roadmaster V8-5.7L - Oil Change - Humble, Texas
Very professional and quick.

Edgar

9 years of experience
202 reviews
Edgar
9 years of experience
Buick Roadmaster V8-5.7L - Fuel Pressure Regulator - Austin, Texas
Great job Edgar!

Emanuel

17 years of experience
45 reviews
Emanuel
17 years of experience
Buick Roadmaster V8-5.7L - Alternator Repair - Mattapan, Massachusetts

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
Buick Roadmaster V8-5.7L - Distributor - Indianapolis, Indiana
Experience mechanic!

Excellent Rating

(35)

Rating Summary
31
2
0
1
1
31
2
0
1
1
Number of Buick Roadmaster services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Rules of the Road For Massachusetts Drivers
While While you may be familiar with the driving laws in your own state and those that are based on common sense, that does not mean the rules will be the same in other states. If you are planning to...
P0079 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0079 code definition Exhaust Valve Control Solenoid Circuit Low (Bank 1) What the P0079 code means P0079 indicates an issue that is...
How to Clean Brake Dust
Brake Brake dust (https://www.yourmechanic.com/article/what-is-brake-dust) is residue that accumulates on a car’s wheels over time. The dust comes from the brake pads (https://www.yourmechanic.com/article/what-are-brake-pads-made-of), which wear down over time from the friction of braking. The pads slowly wear down (https://www.yourmechanic.com/article/how-long-do-brake-pads-last_2), and the...

Power seat blowing fuses.

You may have a dual issue here. The first issue being that your switch went bad allowing too much current to pass through it, therefore blowing fuses. Once the passenger switch was installed the fuses quit blowing. The second issue...

Can a poorly installed wheel bearing cause extensive damage when driven on?

Hi there: It's highly unlikely that the installation of a wheel bearing causes mechanical damage that the mechanic has listed above. Typically those components (Axle shaft leaking, steering knuckle, lower ball joint, lower control arm, front strut) are not touched...

I have a 2007 Ford F1 50 I just replaced the automatic [transmission](/topics-transmission-ford/) and was about to go for a test drive when I start the vehicle and shift into any of the gears the transmission does not engage is it possible that I have missed something

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com