Q: won't move in drive
I just got into an accident with my Mercedes C250. The car still turns on, and I am able to shift into drive. But when i step on the pedal the car will not move or go into reverse. What could be wrong here? What should I do?
Recommended Services
| Car does not move when I step on the gas pedal Inspection | $94.99 - $114.99 | Get a Quote |
Hello. When your car has been in an accident, the impact will cause it to go into a fail safe mode. While in fail safe mode, the car may come on but you will be unable to drive. This is especially true if the accident causes the air bags to eject. The fail safe mode will have to be reset after repairs are made before the vehicle will be able to move again. You may be able to find instructions in the owner’s manual for resetting the fail safe mode. If not, have a certified technician, like one from YourMechanic come to assist you with your acceleration issue.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How does the traction control system work?
While your car is equipped with the AdvanceTrac® system, it also includes a traction control system (TCS). It’s an automated system that turns on when you crank the engine, although you can turn it off using the TCS Off button...
Intake manifold cracked
Cracks in the manifold can leak air, resulting in a vacuum leak and poor engine performance. It could leak coolant as well, externally, into the cylinders, or into the oil. I would have a certified mechanic, such as one from...
Transmission Jerks
Have the drive shaft joints and rear axle pinion bearing checked to see if they have excessive play. Also, check to see if you have any broken motor or transmission mounts. This should help narrow down the problem for you....
Engine, power steering, and brakes shut off
Given you had a "sudden" failure, you might check the crank position sensor first. This component instructs the ignition module when to fire the spark plugs. If the crank position sensor is OK, work your way up the electrical path....
Starting issue, 1991 Saab 9000
Typically, when this type of problem occurs, the most common causes are either a bad battery, or a poor connection. If the vehicle starts and runs normally after being jumped, this is usually a sign that there may be enough...
If I take the catalytic converters off, what do I do with the sensors?
If you remove the oxygen sensors from your vehicle, you will ruin the efficiency of the engine, thus consuming around 10 to 20 percent more gas than otherwise required, and also cause early failure of many components such as the...
Vibration when in idle and right on take off then stops
Among the possibilities are the engine is out of tune (scope the engine), the harmonic balancer is defective (has shifted; rubber bond is broken), a rotating element is loose (torque converter to flex plate connection; crank or other pulley), the...
The alternator wire gets very hot.
Hi there. It sounds like either the alternator is overcharging or there is lower than normal resistance in the circuit. The average alternator output is around 13.8 volts and amperage dependent upon its rating; 90 amp alternator may have a...
Electrical issues
Hi There, This will require some extensive electrical wiring testing to determine what specific wires have been affected by the fan motor and wiring burning. You will not likely need replace the entire engine wiring as not all of this...
Related articles
The Best Used Cars to Buy If You’re an Architect
Obviously, Obviously, architects appreciate beauty and symmetry. This is not just the case when it comes to their building projects, but also in terms of the vehicles they choose. We have evaluated several used cars, and identified the Mercedes CLA,...
How Long Does a Transmission Speed Sensor Last?
The The transmission speed sensor measures the RPMs of the shaft of the transmission. While the engine is running, but not moving, then the input shaft of the transmission is not moving either. When the input shaft moves, the transmission...
The Difference Between a Sports Car Engine and a Regular Engine
While they are similar in modern design, most everyday car engines are optimized for fuel efficiency and sports car engines for speed and performance.
Browse other content
Services
Maintenance