Q: Windshield wiper clicks and engine revving heard on radio

asked by on July 22, 2016

There are some electrical issues happening with my car.

  1. The radio: It has horrible reception. The stations fade in and out (both AM & FM). Also, there is interference on the speakers coming from the engine. For example, when the windshield wipers click and the engine revs, can hear those sounds in the radio. I checked the connections by removing the radio and everything seems fine.

  2. Random starting trouble: Sometimes, before the engine will start, I have to crank it 3-5 seconds, then turn off, then try again.

A friend suggested that I check the ground wire connections to see if any have rusted out. He said the starting problem and the noises that I hear on the radio could be because of that. The manual isn't very detailed on the wiring diagram and I'm not sure where to look. Could you please explain where I should look to find the ground wires?

Car is hard to start Inspection $94.99 - $114.99 Get a Quote

Yes, corrosion on a ground terminal or splice point can cause various engine and electrical systems issues. Looking at the wiring diagrams I see nothing related between the entertainment and engine control systems that jump out at me as the cause. However, both of these systems are grounded to the chassis and a bad chassis ground could be the cause.

One way to check this would be to do a key on voltage drop test of the chassis to negative battery terminal. The voltage drop should be less than 0.1V. Anything higher than this reading would indicate resistance in the chassis ground system and all ground points should be checked for possible corrosion or looseness. You may want to enlist the help of a mechanic, such as one from YourMechanic, who will have the tools and expertise to diagnose your radio problem and starting issue.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do you add oil to my car?
If you check your oil dipstick and see that the oil level is at or below the minimum line, you can add a quart of oil yourself (make sure that you have your car serviced regularly to check for leaks...
Heavy oil leak when car is on
The first thing to check is the oil filter. Was the oil changed recently? Remove the filter and check the gasket. Did it push out of the groove? Are there two gaskets? Some other sources of pressurized leaks are a...
Car won't start after someone tried to steal it
Two systems in the column need to work for the engine to start. The ignition switch, and the anti-theft system. Your car has some version of the Passlock anti-theft. The ignition switch reads a specific resistance of your key and...
Oil light on, coolant light on, buzzer, odometer quit working
Hello. I would have the engine oil pressure checked immediately. Having the correct oil level isn't enough if the engine is unable to maintain sufficient oil pressure. It's possible the coolant level (https://www.yourmechanic.com/services/coolant-level-sensor-replacement) and oil pressure sensors (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) are faulty,...
Vibration when applying brakes and when steering.
This may be a sign of warped brake rotors and/or potentially failing wheel bearings. When your brake rotors get hot due to the heat caused by friction, they can develop hot spots in them which causes an uneven surface area....
Oil Change timing
Your vehicle has an on board, computerized oil life indicator system. When the system determines that an oil change is actually needed, the oil life indicator will provide a maintenance message (see your Owner's Manual for further and complete details)....
How do I reset anti theft on a Hyundai Santa Fe?
The vehicles systems can be reset just by disconnecting the battery for an hour and all fault codes are usually cleared once the power is disconnected. however, this will not clear any problems with the vehicle. If there is a...
Hi, my name is Jorge from North Houston, TX, and I'd like to know the location of the Expansion Valve (Orifice Tube) for 2011 GMC
Your vehicle has an expansion valve mounted at the firewall behind the two a/c lines where they connect to the evaporator assembly. You will need to evacuate the a/c refrigerant and remove line connection and then unbolt the expansion valve....
I have an 05 Nissan Maxima with the obd2 port missing, how do I get an obd2 port installed?
Most of the time something such as this would likely need to be done at a local dealership. This is not a commonly replaced part and therefore most places will not have the tools and equipment required to install and...

Related articles

Symptoms of a Bad or Failing Alternator
Common signs include having to jump start the car frequently, dim lights when operating the vehicle, or the Battery Light coming on.
How Long Does an Electronic Ignition Pickup Last?
Your Your vehicle depends on electricity in order to run, and this electricity can be traced back to the spark plugs which create a spark to ignite the fuel. It’s a whole process, where each step depends on the other...
How Long Does an Exhaust Gas Recirculation (EGR) Tube Last?
The The exhaust gas recirculation (EGR) tube is part of your vehicle's EGR (exhaust gas recirculation) system and is part of the EGR valve. The EGR valve works to recirculate the exhaust gas your car produces so that you aren't...